Complete HPL-faced cleanroom wall panel with protected aluminum edges

Temiz Oda Duvar ve Tavan Sistemleri

HPL-Faced Temiz Oda Duvar Panelleri

A rigid modular wall panel finished with compact high-pressure laminate, providing a hard, scratch-resistant and chemically tolerant surface for laboratories, healthcare rooms and high-contact clean environments.

Compact HPL Surface
Scratch-Resistant Wall Face
Broad Color Selection
Protected Flush Edges

Alıntı isteği Browse ürünleri

Ürün tanıtımı

HPL-Faced Cleanroom Wall Panels use compact high-pressure laminate as the visible room surface over a rigid framed sandwich substrate. Thermoset resins and compressed kraft layers give HPL a hard, non-porous face that withstands abrasion and many commonly used laboratory cleaners. The thicker decorative layer also hides small substrate imperfections better than thin painted steel. Aluminum perimeter profiles protect cut edges, align modules and receive a continuous hygienic seal. This panel is intended primarily for walls and partitions where impact durability and finish choice are important.

Ana Özellikler

Compact HPL provides a hard wearing surface with better scratch resistance than thin paint coatings.

Color-through or decorative sheets offer a wide visual range without exposed porous material.

The non-porous laminate face supports routine wiping and spill removal.

Aluminum edge profiles protect the laminate from chipping at panel joints.

Rigid framed construction allows damaged wall modules to be replaced individually.

Müşteri Ürün Sorunları

Correct HPL selection depends on chemical exposure, edge protection, scratch duty and the support provided by the substrate.

Thin painted skins show scratches quickly in trolley and equipment routes.A thicker HPL surface resists routine scuffing and retains a consistent decorative finish.

Unprotected laminate edges can chip or absorb liquid after impact.Closed aluminum profiles shield cut edges and keep cleaning fluids away from the substrate.

Not every HPL grade tolerates every solvent or disinfectant.The exposed laminate grade is matched to the actual chemical list and contact duration.

A flexible backing makes hard laminate sound hollow and crack around fittings.Continuous rigid support and local inserts stabilize the facing around mounted accessories.

Tipik uygulamalar

Laboratory wet and dry roomsHealthcare clean corridorsPharmaceutical support spacesFood quality-control roomsHigh-contact cleanroom partitions

Teknik parametreler

Typical HPL-faced cleanroom wall panel construction ranges are shown below.

Temel malzemeler	Rock wool or aluminum honeycomb in a four-sided frame
Panel kalınlığı	50, 75 or 100 mm
Effective Width (Etkili Genişlik)	1000, 1180 or 1200 mm
Maksimum uzunluk	6000 mm
Çelik yüz yüze kalınlığı	0.50 mm galvanized steel backing beneath 4–6 mm HPL
Core Density (Çekirdek Yoğunluğu)	100–140 kg/m³ rock wool or approximately 27 kg/m³ aluminum honeycomb
Termal İletkenlik	0.040–0.150 W/(m·K), depending on the selected core
Yüzey bitirme	Compact HPL meeting EN 438 or ISO 4586 surface requirements
Ortak tip	Aluminum-framed flush joint with hygienic sealant
Customization (Özelleşme)	Kullanılan amaçlanan uygulama ve çalışma ortamına göre kullanılabilir

Mevcut Seçenekler

Chemical-resistant laboratory HPLAntibacterial HPL surfaceRock wool or aluminum honeycomb coreCustom color and texture

Planning a HPL-Faced Cleanroom Wall Panel specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun