English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Стенные и потолочные системы для чистых комнат
HPL-Faced Cleanroom Wall Panel
A rigid modular wall panel finished with compact high-pressure laminate, providing a hard, scratch-resistant and chemically tolerant surface for laboratories, healthcare rooms and high-contact clean environments.
- Compact HPL Surface
- Scratch-Resistant Wall Face
- Broad Color Selection
- Protected Flush Edges
Введение продукции
HPL-Faced Cleanroom Wall Panels use compact high-pressure laminate as the visible room surface over a rigid framed sandwich substrate. Thermoset resins and compressed kraft layers give HPL a hard, non-porous face that withstands abrasion and many commonly used laboratory cleaners. The thicker decorative layer also hides small substrate imperfections better than thin painted steel. Aluminum perimeter profiles protect cut edges, align modules and receive a continuous hygienic seal. This panel is intended primarily for walls and partitions where impact durability and finish choice are important.
Основные характеристики
Color-through or decorative sheets offer a wide visual range without exposed porous material.
The non-porous laminate face supports routine wiping and spill removal.
Aluminum edge profiles protect the laminate from chipping at panel joints.
Rigid framed construction allows damaged wall modules to be replaced individually.
Обеспокоенность клиентов продуктами
Correct HPL selection depends on chemical exposure, edge protection, scratch duty and the support provided by the substrate.
Thin painted skins show scratches quickly in trolley and equipment routes.A thicker HPL surface resists routine scuffing and retains a consistent decorative finish.
Unprotected laminate edges can chip or absorb liquid after impact.Closed aluminum profiles shield cut edges and keep cleaning fluids away from the substrate.
Not every HPL grade tolerates every solvent or disinfectant.The exposed laminate grade is matched to the actual chemical list and contact duration.
A flexible backing makes hard laminate sound hollow and crack around fittings.Continuous rigid support and local inserts stabilize the facing around mounted accessories.
Типичные приложения
Laboratory wet and dry roomsHealthcare clean corridorsPharmaceutical support spacesFood quality-control roomsHigh-contact cleanroom partitions
Технические параметры
Typical HPL-faced cleanroom wall panel construction ranges are shown below.
| Основной материал | Rock wool or aluminum honeycomb in a four-sided frame |
|---|---|
| Толщина панели | 50, 75 or 100 mm |
| эффективная ширина | 1000, 1180 or 1200 mm |
| Максимальная длина | 6000 mm |
| Толщина линий стали | 0.50 mm galvanized steel backing beneath 4–6 mm HPL |
| Плотность ядра | 100–140 kg/m³ rock wool or approximately 27 kg/m³ aluminum honeycomb |
| Теплопроводимость | 0.040–0.150 W/(m·K), depending on the selected core |
| Поверхностная отделка | Compact HPL meeting EN 438 or ISO 4586 surface requirements |
| Объединенный тип | Aluminum-framed flush joint with hygienic sealant |
| Customization | Доступно в зависимости от предполагаемого приложения и операционной среды |
Доступные варианты
Chemical-resistant laboratory HPLAntibacterial HPL surfaceRock wool or aluminum honeycomb coreCustom color and texture
Planning a HPL-Faced Cleanroom Wall Panel specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
