Complete HPL-faced cleanroom wall panel with protected aluminum edges

Dinding bilik bersih dan sistem siling

Panel Dinding Bilik Bersih Berhadapan HPL

A rigid modular wall panel finished with compact high-pressure laminate, providing a hard, scratch-resistant and chemically tolerant surface for laboratories, healthcare rooms and high-contact clean environments.

Compact HPL Surface
Scratch-Resistant Wall Face
Broad Color Selection
Protected Flush Edges

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

HPL-Faced Cleanroom Wall Panels use compact high-pressure laminate as the visible room surface over a rigid framed sandwich substrate. Thermoset resins and compressed kraft layers give HPL a hard, non-porous face that withstands abrasion and many commonly used laboratory cleaners. The thicker decorative layer also hides small substrate imperfections better than thin painted steel. Aluminum perimeter profiles protect cut edges, align modules and receive a continuous hygienic seal. This panel is intended primarily for walls and partitions where impact durability and finish choice are important.

Ciri-ciri Utama

Compact HPL provides a hard wearing surface with better scratch resistance than thin paint coatings.

Color-through or decorative sheets offer a wide visual range without exposed porous material.

The non-porous laminate face supports routine wiping and spill removal.

Aluminum edge profiles protect the laminate from chipping at panel joints.

Rigid framed construction allows damaged wall modules to be replaced individually.

Kebimbangan Produk Pelanggan

Correct HPL selection depends on chemical exposure, edge protection, scratch duty and the support provided by the substrate.

Thin painted skins show scratches quickly in trolley and equipment routes.A thicker HPL surface resists routine scuffing and retains a consistent decorative finish.

Unprotected laminate edges can chip or absorb liquid after impact.Closed aluminum profiles shield cut edges and keep cleaning fluids away from the substrate.

Not every HPL grade tolerates every solvent or disinfectant.The exposed laminate grade is matched to the actual chemical list and contact duration.

A flexible backing makes hard laminate sound hollow and crack around fittings.Continuous rigid support and local inserts stabilize the facing around mounted accessories.

Permohonan yang biasa

Laboratory wet and dry roomsHealthcare clean corridorsRuang Sokongan FarmasiFood quality-control roomsHigh-contact cleanroom partitions

Parameter teknikal

Typical HPL-faced cleanroom wall panel construction ranges are shown below.

Bahan Teras	Rock wool or aluminum honeycomb in a four-sided frame
Ketebalan Panel	50, 75 or 100 mm
Lebar berkesan	1000, 1180 or 1200 mm
Panjang maksimum	6000 mm
Keluli Menghadapi Ketebalan	0.50 mm galvanized steel backing beneath 4–6 mm HPL
Ketumpatan teras	100–140 kg/m³ rock wool or approximately 27 kg/m³ aluminum honeycomb
Kekonduksian Terma	0.040–0.150 W/(m·K), depending on the selected core
Kemasan permukaan	Compact HPL meeting EN 438 or ISO 4586 surface requirements
Jenis Bersatu	Aluminum-framed flush joint with hygienic sealant
Penyesuaian	Terdapat berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi

Pilihan yang boleh didapati

Chemical-resistant laboratory HPLAntibacterial HPL surfaceRock wool or aluminum honeycomb coreCustom color and texture

Planning a HPL-Faced Cleanroom Wall Panel specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami