Complete HPL-faced cleanroom wall panel with protected aluminum edges

클린룸 벽 및 천장 시스템

HPL - faced 클린룸 벽 패널

A rigid modular wall panel finished with compact high-pressure laminate, providing a hard, scratch-resistant and chemically tolerant surface for laboratories, healthcare rooms and high-contact clean environments.

Compact HPL Surface
Scratch-Resistant Wall Face
Broad Color Selection
Protected Flush Edges

견적 요청 제품 찾아보기

상품 소개

HPL-Faced Cleanroom Wall Panels use compact high-pressure laminate as the visible room surface over a rigid framed sandwich substrate. Thermoset resins and compressed kraft layers give HPL a hard, non-porous face that withstands abrasion and many commonly used laboratory cleaners. The thicker decorative layer also hides small substrate imperfections better than thin painted steel. Aluminum perimeter profiles protect cut edges, align modules and receive a continuous hygienic seal. This panel is intended primarily for walls and partitions where impact durability and finish choice are important.

주요 기능

Compact HPL provides a hard wearing surface with better scratch resistance than thin paint coatings.

Color-through or decorative sheets offer a wide visual range without exposed porous material.

The non-porous laminate face supports routine wiping and spill removal.

Aluminum edge profiles protect the laminate from chipping at panel joints.

Rigid framed construction allows damaged wall modules to be replaced individually.

고객 제품 관심사

Correct HPL selection depends on chemical exposure, edge protection, scratch duty and the support provided by the substrate.

Thin painted skins show scratches quickly in trolley and equipment routes.A thicker HPL surface resists routine scuffing and retains a consistent decorative finish.

Unprotected laminate edges can chip or absorb liquid after impact.Closed aluminum profiles shield cut edges and keep cleaning fluids away from the substrate.

Not every HPL grade tolerates every solvent or disinfectant.The exposed laminate grade is matched to the actual chemical list and contact duration.

A flexible backing makes hard laminate sound hollow and crack around fittings.Continuous rigid support and local inserts stabilize the facing around mounted accessories.

일반적인 응용 프로그램

Laboratory wet and dry roomsHealthcare clean corridorsPharmaceutical support spacesFood quality-control roomsHigh-contact cleanroom partitions

기술 매개변수

Typical HPL-faced cleanroom wall panel construction ranges are shown below.

핵심 재료	Rock wool or aluminum honeycomb in a four-sided frame
패널 두께	50, 75 또는 100 mm
유효 폭	1000, 1180 or 1200 mm
최대 길이	6000 mm
강철 면면 두께	0.50 mm galvanized steel backing beneath 4–6 mm HPL
코어 밀도	100–140 kg/m³ rock wool or approximately 27 kg/m³ aluminum honeycomb
열전도도 (Thermal Conductivity)	0.040–0.150 W/(m·K), depending on the selected core
표면 마무리	Compact HPL meeting EN 438 or ISO 4586 surface requirements
접합 유형	Aluminum-framed flush joint with hygienic sealant
사용자 정의	사용 대상 어플리케이션 및 운영 환경에 따라 사용 가능

사용 가능한 옵션

Chemical-resistant laboratory HPLAntibacterial HPL surfaceRock wool or aluminum honeycomb coreCustom color and texture

Planning a HPL-Faced Cleanroom Wall Panel specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.