Bahasa Inggris
Bahasa Jerman
Bahasa Arab
Bahasa Perancis: Bahasa Perancis
Bahasa IndonesiaSaat ini
Bahasa Jepang
Bahasa Korea
Bahasa Melayu
Bahasa Portugis
Bahasa Rusia
Bahasa Spanyol
Bahasa Thailand
Bahasa Turki
Bahasa Vietnam
Sistem Dinding dan Langit-langit Cleanroom
Panel Dinding Cleanroom HPL-Faced
A rigid modular wall panel finished with compact high-pressure laminate, providing a hard, scratch-resistant and chemically tolerant surface for laboratories, healthcare rooms and high-contact clean environments.
- Compact HPL Surface
- Scratch-Resistant Wall Face
- Broad Color Selection
- Protected Flush Edges
Perkenalan produk
HPL-Faced Cleanroom Wall Panels use compact high-pressure laminate as the visible room surface over a rigid framed sandwich substrate. Thermoset resins and compressed kraft layers give HPL a hard, non-porous face that withstands abrasion and many commonly used laboratory cleaners. The thicker decorative layer also hides small substrate imperfections better than thin painted steel. Aluminum perimeter profiles protect cut edges, align modules and receive a continuous hygienic seal. This panel is intended primarily for walls and partitions where impact durability and finish choice are important.
Fitur utama:
Color-through or decorative sheets offer a wide visual range without exposed porous material.
The non-porous laminate face supports routine wiping and spill removal.
Aluminum edge profiles protect the laminate from chipping at panel joints.
Rigid framed construction allows damaged wall modules to be replaced individually.
Kekhawatiran produk pelanggan
Correct HPL selection depends on chemical exposure, edge protection, scratch duty and the support provided by the substrate.
Thin painted skins show scratches quickly in trolley and equipment routes.A thicker HPL surface resists routine scuffing and retains a consistent decorative finish.
Unprotected laminate edges can chip or absorb liquid after impact.Closed aluminum profiles shield cut edges and keep cleaning fluids away from the substrate.
Not every HPL grade tolerates every solvent or disinfectant.The exposed laminate grade is matched to the actual chemical list and contact duration.
A flexible backing makes hard laminate sound hollow and crack around fittings.Continuous rigid support and local inserts stabilize the facing around mounted accessories.
Aplikasi yang Tipis
Laboratory wet and dry roomsHealthcare clean corridorsPharmaceutical support spacesFood quality-control roomsHigh-contact cleanroom partitions
Parameter teknis
Typical HPL-faced cleanroom wall panel construction ranges are shown below.
| Bahan inti | Rock wool or aluminum honeycomb in a four-sided frame |
|---|---|
| Ketebalan Panel (Panel Thickness) | 50, 75 atau 100 mm |
| Efektif lebar | 1000, 1180 or 1200 mm |
| Panjang maksimum | 6000 mm ZXQ000003 |
| Baja menghadap ketebalan | 0.50 mm galvanized steel backing beneath 4–6 mm HPL |
| Kepadatan inti (core density) | 100–140 kg/m³ rock wool or approximately 27 kg/m³ aluminum honeycomb |
| Konduktivitas Termal (Thermal Conductivity) | 0.040–0.150 W/(m·K), depending on the selected core |
| Permukaan selesai | Compact HPL meeting EN 438 or ISO 4586 surface requirements |
| Jenis Bersama | Aluminum-framed flush joint with hygienic sealant |
| Customization (Kustomisasi) | A Tersedia berdasarkan aplikasi dan lingkungan operasi yang dimaksudkan |
Pilihan yang tersedia
Chemical-resistant laboratory HPLAntibacterial HPL surfaceRock wool or aluminum honeycomb coreCustom color and texture
Planning a HPL-Faced Cleanroom Wall Panel specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.
