Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Fluxo laminar e equipamentos de contenção
Sistema de descarga de linhas contínuas
A long folded film liner mounted on a discharge canister so multiple contained bags can be filled, closed and removed without exposing the outlet.
- Long Continuous Film Sleeve
- Multi-Groove Canister
- Repeated Tie-Off Discharge
- Contained Bag Removal
Introdução do produto
The continuous liner system fits beneath an isolator, dust collector, hopper or other discharge point. A long tubular film sleeve is folded onto a grooved stainless canister. Product or waste fills the extended lower section, which is closed with crimps or ties and cut between closures. The remaining liner is then pulled down to form the next bag while the outlet stays covered. Canister diameter, film material and liner length are selected for the product, load and disposal method.
Características-chave
Multiple canister grooves secure the active liner and retained bag stub.
Crimp or tie-off tools create two closures before the filled section is cut away.
The liner can attach to rigid isolators, flexible enclosures or dust hoppers.
Different film formulations support antistatic, strength or compatibility needs.
Preocupações do produto do cliente
Each filled bag must be removed without leaving the process outlet or contaminated bag stub exposed to the operator.
Removing one bag exposes the hopper outlet.The continuous sleeve remains over the canister while the filled lower section is cut away.
A single closure can open after cutting.Two crimps or ties create separated closed ends before division.
Film slides from the outlet under load.A multi-groove canister and retaining bands secure the folded liner.
One liner material is unsuitable for every powder.Film chemistry, thickness and antistatic properties are selected for the actual use.
Aplicações típicas
Powder waste dischargeTablet or component offloadingIsolator bag-outDust-collector hopper emptying
Parâmetros técnicos
Typical configurable construction ranges for a continuous liner discharge system are listed below.
| Material principal | SUS316L multi-groove discharge canister with multilayer polyethylene containment liner and stainless retaining bands |
|---|---|
| Painel de espessura | 0.10-0.25 mm liner film thickness |
| Largura efetiva | 350-600 mm flattened liner width |
| Comprimento máximo | Up to 45000 mm continuous liner length |
| Aço enfrentando espessura | 2.0-4.0 mm SUS316L canister wall |
| Densidade Core | 920-960 kg/m³ for multilayer polyethylene liner film |
| Condutividade térmica | 0.33-0.50 W/(m·K) for polyethylene liner film |
| Superfície acabado | Electropolished stainless canister with smooth clear or antistatic containment film |
| Tipo conjunto | Multi-groove canister with elastic retainers, double-crimp closure and replaceable continuous film sleeve |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
200 or 300 mm canister interfaceClear or antistatic filmManual crimp and removal toolsDrum support and bag handling frame
Planning a Continuous Liner Discharge System specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
