Continuous liner discharge system with folded sleeve on a stainless canister

層流 · 封じ込め装置

連続ライナー放電システム

A long folded film liner mounted on a discharge canister so multiple contained bags can be filled, closed and removed without exposing the outlet.

Long Continuous Film Sleeve
Multi-Groove Canister
Repeated Tie-Off Discharge
Contained Bag Removal

見積もりリクエスト製品案内

商品紹介

The continuous liner system fits beneath an isolator, dust collector, hopper or other discharge point. A long tubular film sleeve is folded onto a grooved stainless canister. Product or waste fills the extended lower section, which is closed with crimps or ties and cut between closures. The remaining liner is then pulled down to form the next bag while the outlet stays covered. Canister diameter, film material and liner length are selected for the product, load and disposal method.

主要な特徴

A long folded sleeve supports repeated bag changes without uncovering the discharge neck.

Multiple canister grooves secure the active liner and retained bag stub.

Crimp or tie-off tools create two closures before the filled section is cut away.

The liner can attach to rigid isolators, flexible enclosures or dust hoppers.

Different film formulations support antistatic, strength or compatibility needs.

お客様の製品に関する懸念事項

Each filled bag must be removed without leaving the process outlet or contaminated bag stub exposed to the operator.

Removing one bag exposes the hopper outlet.The continuous sleeve remains over the canister while the filled lower section is cut away.

A single closure can open after cutting.Two crimps or ties create separated closed ends before division.

Film slides from the outlet under load.A multi-groove canister and retaining bands secure the folded liner.

One liner material is unsuitable for every powder.Film chemistry, thickness and antistatic properties are selected for the actual use.

典型的な用途

Powder waste dischargeTablet or component offloadingIsolator bag-outDust-collector hopper emptying

技術的なパラメータ

Typical configurable construction ranges for a continuous liner discharge system are listed below.

コア材料	SUS316L multi-groove discharge canister with multilayer polyethylene containment liner and stainless retaining bands
パネルの厚さ	0.10-0.25 mm liner film thickness
有効幅	350-600 mm flattened liner width
最大長さ	Up to 45000 mm continuous liner length
鋼鉄の厚さを直面する	2.0-4.0 mm SUS316L canister wall
コア密度	920-960 kg/m³ for multilayer polyethylene liner film
熱伝導率	0.33-0.50 W/(m·K) for polyethylene liner film
表面仕上げ	Electropolished stainless canister with smooth clear or antistatic containment film
ジョイントタイプ	Multi-groove canister with elastic retainers, double-crimp closure and replaceable continuous film sleeve
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

200 or 300 mm canister interfaceClear or antistatic filmManual crimp and removal toolsDrum support and bag handling frame

Planning a Continuous Liner Discharge System specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する