Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de flujo laminar y contención
Sistema de descarga de liner continuo
A long folded film liner mounted on a discharge canister so multiple contained bags can be filled, closed and removed without exposing the outlet.
- Long Continuous Film Sleeve
- Multi-Groove Canister
- Repeated Tie-Off Discharge
- Contained Bag Removal
Introducción del producto
The continuous liner system fits beneath an isolator, dust collector, hopper or other discharge point. A long tubular film sleeve is folded onto a grooved stainless canister. Product or waste fills the extended lower section, which is closed with crimps or ties and cut between closures. The remaining liner is then pulled down to form the next bag while the outlet stays covered. Canister diameter, film material and liner length are selected for the product, load and disposal method.
Características clave
Multiple canister grooves secure the active liner and retained bag stub.
Crimp or tie-off tools create two closures before the filled section is cut away.
The liner can attach to rigid isolators, flexible enclosures or dust hoppers.
Different film formulations support antistatic, strength or compatibility needs.
Preocupaciones del producto del cliente
Each filled bag must be removed without leaving the process outlet or contaminated bag stub exposed to the operator.
Removing one bag exposes the hopper outlet.The continuous sleeve remains over the canister while the filled lower section is cut away.
A single closure can open after cutting.Two crimps or ties create separated closed ends before division.
Film slides from the outlet under load.A multi-groove canister and retaining bands secure the folded liner.
One liner material is unsuitable for every powder.Film chemistry, thickness and antistatic properties are selected for the actual use.
Aplicaciones típicas
Powder waste dischargeTablet or component offloadingIsolator bag-outDust-collector hopper emptying
Parámetros técnicos
Typical configurable construction ranges for a continuous liner discharge system are listed below.
| Materiales Core | SUS316L multi-groove discharge canister with multilayer polyethylene containment liner and stainless retaining bands |
|---|---|
| Panel de espesor | 0.10-0.25 mm liner film thickness |
| Ancho efectivo | 350-600 mm flattened liner width |
| Longitud máxima | Up to 45000 mm continuous liner length |
| Acero frente a espesor | 2.0-4.0 mm SUS316L canister wall |
| Densidad Core | 920-960 kg/m³ for multilayer polyethylene liner film |
| Conductividad térmica | 0.33-0.50 W/(m·K) for polyethylene liner film |
| Superficie acabada | Electropolished stainless canister with smooth clear or antistatic containment film |
| Tipo conjunto | Multi-groove canister with elastic retainers, double-crimp closure and replaceable continuous film sleeve |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
200 or 300 mm canister interfaceClear or antistatic filmManual crimp and removal toolsDrum support and bag handling frame
Planning a Continuous Liner Discharge System specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
