English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات التدفق والاحتواء الصفائحية
نظام تصريف بطانة مستمر
A long folded film liner mounted on a discharge canister so multiple contained bags can be filled, closed and removed without exposing the outlet.
- Long Continuous Film Sleeve
- Multi-Groove Canister
- Repeated Tie-Off Discharge
- Contained Bag Removal
مقدمة المنتج
The continuous liner system fits beneath an isolator, dust collector, hopper or other discharge point. A long tubular film sleeve is folded onto a grooved stainless canister. Product or waste fills the extended lower section, which is closed with crimps or ties and cut between closures. The remaining liner is then pulled down to form the next bag while the outlet stays covered. Canister diameter, film material and liner length are selected for the product, load and disposal method.
الخصائص الرئيسية
Multiple canister grooves secure the active liner and retained bag stub.
Crimp or tie-off tools create two closures before the filled section is cut away.
The liner can attach to rigid isolators, flexible enclosures or dust hoppers.
Different film formulations support antistatic, strength or compatibility needs.
مخاوف المنتج للعملاء
Each filled bag must be removed without leaving the process outlet or contaminated bag stub exposed to the operator.
Removing one bag exposes the hopper outlet.The continuous sleeve remains over the canister while the filled lower section is cut away.
A single closure can open after cutting.Two crimps or ties create separated closed ends before division.
Film slides from the outlet under load.A multi-groove canister and retaining bands secure the folded liner.
One liner material is unsuitable for every powder.Film chemistry, thickness and antistatic properties are selected for the actual use.
تطبيقات نموذجية
Powder waste dischargeTablet or component offloadingIsolator bag-outDust-collector hopper emptying
المعلمات الفنية
Typical configurable construction ranges for a continuous liner discharge system are listed below.
| المواد الأساسية | SUS316L multi-groove discharge canister with multilayer polyethylene containment liner and stainless retaining bands |
|---|---|
| سمك اللوحة | 0.10-0.25 mm liner film thickness |
| العرض الفعال | 350-600 mm flattened liner width |
| الحد الأقصى الطول | Up to 45000 mm continuous liner length |
| الصلب يواجه سمك | 2.0-4.0 mm SUS316L canister wall |
| الكثافة الأساسية | 920-960 kg/m³ for multilayer polyethylene liner film |
| الموصلية الحرارية | 0.33-0.50 W/(m·K) for polyethylene liner film |
| إنهاء السطح | Electropolished stainless canister with smooth clear or antistatic containment film |
| نوع المشترك | Multi-groove canister with elastic retainers, double-crimp closure and replaceable continuous film sleeve |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
200 or 300 mm canister interfaceClear or antistatic filmManual crimp and removal toolsDrum support and bag handling frame
Planning a Continuous Liner Discharge System specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
