Continuous liner discharge system with folded sleeve on a stainless canister

Laminar Flow and Containment Equipment 에 대한 리뷰 보기

연속 라이너 배출 시스템

A long folded film liner mounted on a discharge canister so multiple contained bags can be filled, closed and removed without exposing the outlet.

Long Continuous Film Sleeve
Multi-Groove Canister
Repeated Tie-Off Discharge
Contained Bag Removal

견적 요청 제품 찾아보기

상품 소개

The continuous liner system fits beneath an isolator, dust collector, hopper or other discharge point. A long tubular film sleeve is folded onto a grooved stainless canister. Product or waste fills the extended lower section, which is closed with crimps or ties and cut between closures. The remaining liner is then pulled down to form the next bag while the outlet stays covered. Canister diameter, film material and liner length are selected for the product, load and disposal method.

주요 기능

A long folded sleeve supports repeated bag changes without uncovering the discharge neck.

Multiple canister grooves secure the active liner and retained bag stub.

Crimp or tie-off tools create two closures before the filled section is cut away.

The liner can attach to rigid isolators, flexible enclosures or dust hoppers.

Different film formulations support antistatic, strength or compatibility needs.

고객 제품 관심사

Each filled bag must be removed without leaving the process outlet or contaminated bag stub exposed to the operator.

Removing one bag exposes the hopper outlet.The continuous sleeve remains over the canister while the filled lower section is cut away.

A single closure can open after cutting.Two crimps or ties create separated closed ends before division.

Film slides from the outlet under load.A multi-groove canister and retaining bands secure the folded liner.

One liner material is unsuitable for every powder.Film chemistry, thickness and antistatic properties are selected for the actual use.

일반적인 응용 프로그램

Powder waste dischargeTablet or component offloadingIsolator bag-outDust-collector hopper emptying

기술 매개변수

Typical configurable construction ranges for a continuous liner discharge system are listed below.

핵심 재료	SUS316L multi-groove discharge canister with multilayer polyethylene containment liner and stainless retaining bands
패널 두께	0.10-0.25 mm liner film thickness
유효 폭	350-600 mm flattened liner width
최대 길이	Up to 45000 mm continuous liner length
강철 면면 두께	2.0-4.0 mm SUS316L canister wall
코어 밀도	920-960 kg/m³ for multilayer polyethylene liner film
열전도도 (Thermal Conductivity)	0.33-0.50 W/(m·K) for polyethylene liner film
표면 마무리	Electropolished stainless canister with smooth clear or antistatic containment film
접합 유형	Multi-groove canister with elastic retainers, double-crimp closure and replaceable continuous film sleeve
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

200 or 300 mm canister interfaceClear or antistatic filmManual crimp and removal toolsDrum support and bag handling frame

Planning a Continuous Liner Discharge System specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.