İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Laminar Flow ve Containment Equipment
Devamlı Liner Deşarj Sistemi
A long folded film liner mounted on a discharge canister so multiple contained bags can be filled, closed and removed without exposing the outlet.
- Long Continuous Film Sleeve
- Multi-Groove Canister
- Repeated Tie-Off Discharge
- Contained Bag Removal
Ürün tanıtımı
The continuous liner system fits beneath an isolator, dust collector, hopper or other discharge point. A long tubular film sleeve is folded onto a grooved stainless canister. Product or waste fills the extended lower section, which is closed with crimps or ties and cut between closures. The remaining liner is then pulled down to form the next bag while the outlet stays covered. Canister diameter, film material and liner length are selected for the product, load and disposal method.
Ana Özellikler
Multiple canister grooves secure the active liner and retained bag stub.
Crimp or tie-off tools create two closures before the filled section is cut away.
The liner can attach to rigid isolators, flexible enclosures or dust hoppers.
Different film formulations support antistatic, strength or compatibility needs.
Müşteri Ürün Sorunları
Each filled bag must be removed without leaving the process outlet or contaminated bag stub exposed to the operator.
Removing one bag exposes the hopper outlet.The continuous sleeve remains over the canister while the filled lower section is cut away.
A single closure can open after cutting.Two crimps or ties create separated closed ends before division.
Film slides from the outlet under load.A multi-groove canister and retaining bands secure the folded liner.
One liner material is unsuitable for every powder.Film chemistry, thickness and antistatic properties are selected for the actual use.
Tipik uygulamalar
Powder waste dischargeTablet or component offloadingIsolator bag-outDust-collector hopper emptying
Teknik parametreler
Typical configurable construction ranges for a continuous liner discharge system are listed below.
| Temel malzemeler | SUS316L multi-groove discharge canister with multilayer polyethylene containment liner and stainless retaining bands |
|---|---|
| Panel kalınlığı | 0.10-0.25 mm liner film thickness |
| Effective Width (Etkili Genişlik) | 350-600 mm flattened liner width |
| Maksimum uzunluk | Up to 45000 mm continuous liner length |
| Çelik yüz yüze kalınlığı | 2.0-4.0 mm SUS316L canister wall |
| Core Density (Çekirdek Yoğunluğu) | 920-960 kg/m³ for multilayer polyethylene liner film |
| Termal İletkenlik | 0.33-0.50 W/(m·K) for polyethylene liner film |
| Yüzey bitirme | Electropolished stainless canister with smooth clear or antistatic containment film |
| Ortak tip | Multi-groove canister with elastic retainers, double-crimp closure and replaceable continuous film sleeve |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
200 or 300 mm canister interfaceClear or antistatic filmManual crimp and removal toolsDrum support and bag handling frame
Planning a Continuous Liner Discharge System specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
