Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Équipement d'écoulement et de confinement laminaires
Système de décharge liner continue
A long folded film liner mounted on a discharge canister so multiple contained bags can be filled, closed and removed without exposing the outlet.
- Long Continuous Film Sleeve
- Multi-Groove Canister
- Repeated Tie-Off Discharge
- Contained Bag Removal
Introduction de produit
The continuous liner system fits beneath an isolator, dust collector, hopper or other discharge point. A long tubular film sleeve is folded onto a grooved stainless canister. Product or waste fills the extended lower section, which is closed with crimps or ties and cut between closures. The remaining liner is then pulled down to form the next bag while the outlet stays covered. Canister diameter, film material and liner length are selected for the product, load and disposal method.
Key Features
Multiple canister grooves secure the active liner and retained bag stub.
Crimp or tie-off tools create two closures before the filled section is cut away.
The liner can attach to rigid isolators, flexible enclosures or dust hoppers.
Different film formulations support antistatic, strength or compatibility needs.
Préoccupations du client produit
Each filled bag must be removed without leaving the process outlet or contaminated bag stub exposed to the operator.
Removing one bag exposes the hopper outlet.The continuous sleeve remains over the canister while the filled lower section is cut away.
A single closure can open after cutting.Two crimps or ties create separated closed ends before division.
Film slides from the outlet under load.A multi-groove canister and retaining bands secure the folded liner.
One liner material is unsuitable for every powder.Film chemistry, thickness and antistatic properties are selected for the actual use.
Les applications typiques
Powder waste dischargeTablet or component offloadingIsolator bag-outDust-collector hopper emptying
Paramètres techniques
Typical configurable construction ranges for a continuous liner discharge system are listed below.
| Matériaux de base | SUS316L multi-groove discharge canister with multilayer polyethylene containment liner and stainless retaining bands |
|---|---|
| Panneau épaisseur | 0.10-0.25 mm liner film thickness |
| Largeur effective | 350-600 mm flattened liner width |
| Longueur maximale | Up to 45000 mm continuous liner length |
| Acier face épaisseur | 2.0-4.0 mm SUS316L canister wall |
| Densité Core | 920-960 kg/m³ for multilayer polyethylene liner film |
| Conductivité thermique | 0.33-0.50 W/(m·K) for polyethylene liner film |
| surface finie | Electropolished stainless canister with smooth clear or antistatic containment film |
| Type joint | Multi-groove canister with elastic retainers, double-crimp closure and replaceable continuous film sleeve |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
200 or 300 mm canister interfaceClear or antistatic filmManual crimp and removal toolsDrum support and bag handling frame
Planning a Continuous Liner Discharge System specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
