Continuous liner discharge system with folded sleeve on a stainless canister

Aliran Laminar dan Peralatan Pengekangan

Sistem Pelepasan Liner Berterusan

A long folded film liner mounted on a discharge canister so multiple contained bags can be filled, closed and removed without exposing the outlet.

Long Continuous Film Sleeve
Multi-Groove Canister
Repeated Tie-Off Discharge
Contained Bag Removal

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The continuous liner system fits beneath an isolator, dust collector, hopper or other discharge point. A long tubular film sleeve is folded onto a grooved stainless canister. Product or waste fills the extended lower section, which is closed with crimps or ties and cut between closures. The remaining liner is then pulled down to form the next bag while the outlet stays covered. Canister diameter, film material and liner length are selected for the product, load and disposal method.

Ciri-ciri Utama

A long folded sleeve supports repeated bag changes without uncovering the discharge neck.

Multiple canister grooves secure the active liner and retained bag stub.

Crimp or tie-off tools create two closures before the filled section is cut away.

The liner can attach to rigid isolators, flexible enclosures or dust hoppers.

Different film formulations support antistatic, strength or compatibility needs.

Kebimbangan Produk Pelanggan

Each filled bag must be removed without leaving the process outlet or contaminated bag stub exposed to the operator.

Removing one bag exposes the hopper outlet.The continuous sleeve remains over the canister while the filled lower section is cut away.

A single closure can open after cutting.Two crimps or ties create separated closed ends before division.

Film slides from the outlet under load.A multi-groove canister and retaining bands secure the folded liner.

One liner material is unsuitable for every powder.Film chemistry, thickness and antistatic properties are selected for the actual use.

Permohonan yang biasa

Powder waste dischargeTablet or component offloadingIsolator bag-outDust-collector hopper emptying

Parameter teknikal

Typical configurable construction ranges for a continuous liner discharge system are listed below.

Bahan Teras	SUS316L multi-groove discharge canister with multilayer polyethylene containment liner and stainless retaining bands
Ketebalan Panel	0.10-0.25 mm liner film thickness
Lebar berkesan	350-600 mm flattened liner width
Panjang maksimum	Up to 45000 mm continuous liner length
Keluli Menghadapi Ketebalan	2.0-4.0 mm SUS316L canister wall
Ketumpatan teras	920-960 kg/m³ for multilayer polyethylene liner film
Kekonduksian Terma	0.33-0.50 W/(m·K) for polyethylene liner film
Kemasan permukaan	Electropolished stainless canister with smooth clear or antistatic containment film
Jenis Bersatu	Multi-groove canister with elastic retainers, double-crimp closure and replaceable continuous film sleeve
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

200 or 300 mm canister interfaceClear or antistatic filmManual crimp and removal toolsDrum support and bag handling frame

Planning a Continuous Liner Discharge System specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami