Modular cleanroom workbench with stainless top and accessory uprights

Móveis de sala limpa e produtos de aço inoxidável

Z Cleanroom Workbench (em inglês)

A configurable cleanroom workstation that organizes tools, power and process accessories around a smooth low-shedding work surface.

Modular accessory uprights
Cleanable low-shedding surfaces
Concealed service routing
Fixed or height-adjustable frame

Solicite um orçamento. Browse produtos

Introdução do produto

The cleanroom workbench is built as a modular production station rather than a simple table. A Type 304 stainless steel work surface mounts to a sealed powder-coated steel frame with enclosed cable and utility routing. Rear uprights can carry task lighting, tool rails and shelves without drilling the primary work area. Height, leg format and airflow-friendly perforation patterns can be selected around the operator, process equipment and room airflow direction.

Características-chave

Rear uprights position shelves and task lighting above the process without consuming the main work area.

Enclosed cable channels separate power and data leads from routine wipe-down surfaces.

Low-shedding frame coatings and sealed end caps prevent exposed raw metal and hollow cavities.

Modular drawers, monitor arms and tool rails can be rearranged as the production step changes.

Preocupações do produto do cliente

Clean processes often outgrow generic benches because tools, cables and operator accessories accumulate directly on the work surface.

Loose cables cross the work zone and create repeated wiping obstacles.Rear service channels route power and data away from the process surface.

Fixed shelves force operators to work around poorly positioned tools.Adjustable uprights let accessories move vertically and laterally without modifying the top.

Painted industrial frames chip under disinfectant and repeated impact.Cleanroom powder coating or stainless construction protects sealed frame surfaces.

One standard height does not fit seated inspection and standing assembly tasks.Fixed, telescoping or powered height bases match the intended operator posture.

Aplicações típicas

Clean assembly cellsPharmaceutical packagingOptics inspectionLaboratórios de BiotecnologiaSemiconductor support areas

Parâmetros técnicos

Typical configurable specifications for a modular cleanroom workbench are listed below.

Material principal	Type 304 stainless steel work surface on a sealed powder-coated steel modular frame
Painel de espessura	1.2–2.0 mm stainless worktop skin on a 30–40 mm reinforced assembly
Largura efetiva	600–900 mm work surface depth
Comprimento máximo	2400 mm
Aço enfrentando espessura	1.0–1.5 mm for stainless skins and enclosed service panels
Densidade Core	7900–8030 kg/m³ for the stainless steel worktop
Condutividade térmica	14–17 W/(m·K) for the Type 304 stainless steel worktop
Superfície acabado	Brushed stainless steel top with light-gray or blue cleanroom powder-coated frame
Tipo conjunto	Bolted modular accessory frame with sealed worktop-to-base connections
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

Manual or electric height adjustmentCompact laminate, epoxy resin or perforated stainless worktopTask lighting and power railDrawers and cantilever shelves

Planning a Cleanroom Workbench specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe