Cleanroom Furniture dan Produk Stainless Steel

Cleanroom Workbench

A configurable cleanroom workstation that organizes tools, power and process accessories around a smooth low-shedding work surface.

Modular accessory uprights
Cleanable low-shedding surfaces
Concealed service routing
Fixed or height-adjustable frame

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The cleanroom workbench is built as a modular production station rather than a simple table. A Type 304 stainless steel work surface mounts to a sealed powder-coated steel frame with enclosed cable and utility routing. Rear uprights can carry task lighting, tool rails and shelves without drilling the primary work area. Height, leg format and airflow-friendly perforation patterns can be selected around the operator, process equipment and room airflow direction.

Fitur utama:

Rear uprights position shelves and task lighting above the process without consuming the main work area.

Enclosed cable channels separate power and data leads from routine wipe-down surfaces.

Low-shedding frame coatings and sealed end caps prevent exposed raw metal and hollow cavities.

Modular drawers, monitor arms and tool rails can be rearranged as the production step changes.

Kekhawatiran produk pelanggan

Clean processes often outgrow generic benches because tools, cables and operator accessories accumulate directly on the work surface.

Loose cables cross the work zone and create repeated wiping obstacles.Rear service channels route power and data away from the process surface.

Fixed shelves force operators to work around poorly positioned tools.Adjustable uprights let accessories move vertically and laterally without modifying the top.

Painted industrial frames chip under disinfectant and repeated impact.Cleanroom powder coating or stainless construction protects sealed frame surfaces.

One standard height does not fit seated inspection and standing assembly tasks.Fixed, telescoping or powered height bases match the intended operator posture.

Aplikasi yang Tipis

Clean assembly cellsPharmaceutical packagingOptics inspectionLaboratorium BioteknologiSemiconductor support areas

Parameter teknis

Typical configurable specifications for a modular cleanroom workbench are listed below.

Bahan inti	Type 304 stainless steel work surface on a sealed powder-coated steel modular frame
Ketebalan Panel (Panel Thickness)	1.2–2.0 mm stainless worktop skin on a 30–40 mm reinforced assembly
Efektif lebar	600–900 mm work surface depth
Panjang maksimum	2400 mm (sempurna)
Baja menghadap ketebalan	1.0–1.5 mm for stainless skins and enclosed service panels
Kepadatan inti (core density)	7900–8030 kg/m³ for the stainless steel worktop
Konduktivitas Termal (Thermal Conductivity)	14–17 W/(m·K) for the Type 304 stainless steel worktop
Permukaan selesai	Brushed stainless steel top with light-gray or blue cleanroom powder-coated frame
Jenis Bersama	Bolted modular accessory frame with sealed worktop-to-base connections
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Manual or electric height adjustmentCompact laminate, epoxy resin or perforated stainless worktopTask lighting and power railDrawers and cantilever shelves

Planning a Cleanroom Workbench specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami