Modular cleanroom workbench with stainless top and accessory uprights

クリーンルーム家具 · ステンレス製品

クリーンルームのワークベンチ

A configurable cleanroom workstation that organizes tools, power and process accessories around a smooth low-shedding work surface.

Modular accessory uprights
Cleanable low-shedding surfaces
Concealed service routing
Fixed or height-adjustable frame

見積もりリクエスト製品案内

商品紹介

The cleanroom workbench is built as a modular production station rather than a simple table. A Type 304 stainless steel work surface mounts to a sealed powder-coated steel frame with enclosed cable and utility routing. Rear uprights can carry task lighting, tool rails and shelves without drilling the primary work area. Height, leg format and airflow-friendly perforation patterns can be selected around the operator, process equipment and room airflow direction.

主要な特徴

Rear uprights position shelves and task lighting above the process without consuming the main work area.

Enclosed cable channels separate power and data leads from routine wipe-down surfaces.

Low-shedding frame coatings and sealed end caps prevent exposed raw metal and hollow cavities.

Modular drawers, monitor arms and tool rails can be rearranged as the production step changes.

お客様の製品に関する懸念事項

Clean processes often outgrow generic benches because tools, cables and operator accessories accumulate directly on the work surface.

Loose cables cross the work zone and create repeated wiping obstacles.Rear service channels route power and data away from the process surface.

Fixed shelves force operators to work around poorly positioned tools.Adjustable uprights let accessories move vertically and laterally without modifying the top.

Painted industrial frames chip under disinfectant and repeated impact.Cleanroom powder coating or stainless construction protects sealed frame surfaces.

One standard height does not fit seated inspection and standing assembly tasks.Fixed, telescoping or powered height bases match the intended operator posture.

典型的な用途

Clean assembly cellsPharmaceutical packagingOptics inspectionBiotechnology laboratoriesSemiconductor support areas

技術的なパラメータ

Typical configurable specifications for a modular cleanroom workbench are listed below.

コア材料	Type 304 stainless steel work surface on a sealed powder-coated steel modular frame
パネルの厚さ	1.2–2.0 mm stainless worktop skin on a 30–40 mm reinforced assembly
有効幅	600–900 mm work surface depth
最大長さ	2400 mm
鋼鉄の厚さを直面する	1.0–1.5 mm for stainless skins and enclosed service panels
コア密度	7900–8030 kg/m³ for the stainless steel worktop
熱伝導率	14–17 W/(m·K) for the Type 304 stainless steel worktop
表面仕上げ	Brushed stainless steel top with light-gray or blue cleanroom powder-coated frame
ジョイントタイプ	Bolted modular accessory frame with sealed worktop-to-base connections
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Manual or electric height adjustmentCompact laminate, epoxy resin or perforated stainless worktopTask lighting and power railDrawers and cantilever shelves

Planning a Cleanroom Workbench specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する