Modular cleanroom workbench with stainless top and accessory uprights

Perabot bilik bersih dan produk keluli tahan karat

Meja kerja bilik bersih

A configurable cleanroom workstation that organizes tools, power and process accessories around a smooth low-shedding work surface.

Modular accessory uprights
Cleanable low-shedding surfaces
Concealed service routing
Fixed or height-adjustable frame

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The cleanroom workbench is built as a modular production station rather than a simple table. A Type 304 stainless steel work surface mounts to a sealed powder-coated steel frame with enclosed cable and utility routing. Rear uprights can carry task lighting, tool rails and shelves without drilling the primary work area. Height, leg format and airflow-friendly perforation patterns can be selected around the operator, process equipment and room airflow direction.

Ciri-ciri Utama

Rear uprights position shelves and task lighting above the process without consuming the main work area.

Enclosed cable channels separate power and data leads from routine wipe-down surfaces.

Low-shedding frame coatings and sealed end caps prevent exposed raw metal and hollow cavities.

Modular drawers, monitor arms and tool rails can be rearranged as the production step changes.

Kebimbangan Produk Pelanggan

Clean processes often outgrow generic benches because tools, cables and operator accessories accumulate directly on the work surface.

Loose cables cross the work zone and create repeated wiping obstacles.Rear service channels route power and data away from the process surface.

Fixed shelves force operators to work around poorly positioned tools.Adjustable uprights let accessories move vertically and laterally without modifying the top.

Painted industrial frames chip under disinfectant and repeated impact.Cleanroom powder coating or stainless construction protects sealed frame surfaces.

One standard height does not fit seated inspection and standing assembly tasks.Fixed, telescoping or powered height bases match the intended operator posture.

Permohonan yang biasa

Clean assembly cellsPharmaceutical packagingOptics inspectionBiotechnology laboratoriesSemiconductor support areas

Parameter teknikal

Typical configurable specifications for a modular cleanroom workbench are listed below.

Bahan Teras	Type 304 stainless steel work surface on a sealed powder-coated steel modular frame
Ketebalan Panel	1.2–2.0 mm stainless worktop skin on a 30–40 mm reinforced assembly
Lebar berkesan	Kedalaman permukaan kerja 600-900 mm
Panjang maksimum	2400 mm / jam
Keluli Menghadapi Ketebalan	1.0–1.5 mm for stainless skins and enclosed service panels
Ketumpatan teras	7900–8030 kg/m³ for the stainless steel worktop
Kekonduksian Terma	14–17 W/(m·K) for the Type 304 stainless steel worktop
Kemasan permukaan	Brushed stainless steel top with light-gray or blue cleanroom powder-coated frame
Jenis Bersatu	Bolted modular accessory frame with sealed worktop-to-base connections
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Manual or electric height adjustmentCompact laminate, epoxy resin or perforated stainless worktopTask lighting and power railDrawers and cantilever shelves

Planning a Cleanroom Workbench specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami