Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Meubles de salle blanche et produits en acier inoxydable
Z Cleanroom Workbench
A configurable cleanroom workstation that organizes tools, power and process accessories around a smooth low-shedding work surface.
- Modular accessory uprights
- Cleanable low-shedding surfaces
- Concealed service routing
- Fixed or height-adjustable frame
Introduction de produit
The cleanroom workbench is built as a modular production station rather than a simple table. A Type 304 stainless steel work surface mounts to a sealed powder-coated steel frame with enclosed cable and utility routing. Rear uprights can carry task lighting, tool rails and shelves without drilling the primary work area. Height, leg format and airflow-friendly perforation patterns can be selected around the operator, process equipment and room airflow direction.
Key Features
Enclosed cable channels separate power and data leads from routine wipe-down surfaces.
Low-shedding frame coatings and sealed end caps prevent exposed raw metal and hollow cavities.
Modular drawers, monitor arms and tool rails can be rearranged as the production step changes.
Préoccupations du client produit
Clean processes often outgrow generic benches because tools, cables and operator accessories accumulate directly on the work surface.
Loose cables cross the work zone and create repeated wiping obstacles.Rear service channels route power and data away from the process surface.
Fixed shelves force operators to work around poorly positioned tools.Adjustable uprights let accessories move vertically and laterally without modifying the top.
Painted industrial frames chip under disinfectant and repeated impact.Cleanroom powder coating or stainless construction protects sealed frame surfaces.
One standard height does not fit seated inspection and standing assembly tasks.Fixed, telescoping or powered height bases match the intended operator posture.
Les applications typiques
Clean assembly cellsPharmaceutical packagingOptics inspectionBiotechnology laboratoriesSemiconductor support areas
Paramètres techniques
Typical configurable specifications for a modular cleanroom workbench are listed below.
| Matériaux de base | Type 304 stainless steel work surface on a sealed powder-coated steel modular frame |
|---|---|
| Panneau épaisseur | 1.2–2.0 mm stainless worktop skin on a 30–40 mm reinforced assembly |
| Largeur effective | 600–900 mm work surface depth |
| Longueur maximale | 2400 mm |
| Acier face épaisseur | 1.0–1.5 mm for stainless skins and enclosed service panels |
| Densité Core | 7900–8030 kg/m³ for the stainless steel worktop |
| Conductivité thermique | 14–17 W/(m·K) for the Type 304 stainless steel worktop |
| surface finie | Brushed stainless steel top with light-gray or blue cleanroom powder-coated frame |
| Type joint | Bolted modular accessory frame with sealed worktop-to-base connections |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Manual or electric height adjustmentCompact laminate, epoxy resin or perforated stainless worktopTask lighting and power railDrawers and cantilever shelves
Planning a Cleanroom Workbench specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
