Modular cleanroom workbench with stainless top and accessory uprights

클린룸 가구 및 스테인레스 스틸 제품

클린룸 워크벤치

A configurable cleanroom workstation that organizes tools, power and process accessories around a smooth low-shedding work surface.

Modular accessory uprights
Cleanable low-shedding surfaces
Concealed service routing
Fixed or height-adjustable frame

견적 요청 제품 찾아보기

상품 소개

The cleanroom workbench is built as a modular production station rather than a simple table. A Type 304 stainless steel work surface mounts to a sealed powder-coated steel frame with enclosed cable and utility routing. Rear uprights can carry task lighting, tool rails and shelves without drilling the primary work area. Height, leg format and airflow-friendly perforation patterns can be selected around the operator, process equipment and room airflow direction.

주요 기능

Rear uprights position shelves and task lighting above the process without consuming the main work area.

Enclosed cable channels separate power and data leads from routine wipe-down surfaces.

Low-shedding frame coatings and sealed end caps prevent exposed raw metal and hollow cavities.

Modular drawers, monitor arms and tool rails can be rearranged as the production step changes.

고객 제품 관심사

Clean processes often outgrow generic benches because tools, cables and operator accessories accumulate directly on the work surface.

Loose cables cross the work zone and create repeated wiping obstacles.Rear service channels route power and data away from the process surface.

Fixed shelves force operators to work around poorly positioned tools.Adjustable uprights let accessories move vertically and laterally without modifying the top.

Painted industrial frames chip under disinfectant and repeated impact.Cleanroom powder coating or stainless construction protects sealed frame surfaces.

One standard height does not fit seated inspection and standing assembly tasks.Fixed, telescoping or powered height bases match the intended operator posture.

일반적인 응용 프로그램

Clean assembly cellsPharmaceutical packagingOptics inspection생명공학 연구소 (Biotechnology Laboratories)Semiconductor support areas

기술 매개변수

Typical configurable specifications for a modular cleanroom workbench are listed below.

핵심 재료	Type 304 stainless steel work surface on a sealed powder-coated steel modular frame
패널 두께	1.2–2.0 mm stainless worktop skin on a 30–40 mm reinforced assembly
유효 폭	600–900 mm work surface depth
최대 길이	2400 mm
강철 면면 두께	1.0–1.5 mm for stainless skins and enclosed service panels
코어 밀도	7900–8030 kg/m³ for the stainless steel worktop
열전도도 (Thermal Conductivity)	14–17 W/(m·K) for the Type 304 stainless steel worktop
표면 마무리	Brushed stainless steel top with light-gray or blue cleanroom powder-coated frame
접합 유형	Bolted modular accessory frame with sealed worktop-to-base connections
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Manual or electric height adjustmentCompact laminate, epoxy resin or perforated stainless worktopTask lighting and power railDrawers and cantilever shelves

Planning a Cleanroom Workbench specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.