English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Мебель для чистых комнат и изделия из нержавеющей стали
Рабочий стол в чистых помещениях
A configurable cleanroom workstation that organizes tools, power and process accessories around a smooth low-shedding work surface.
- Modular accessory uprights
- Cleanable low-shedding surfaces
- Concealed service routing
- Fixed or height-adjustable frame
Введение продукции
The cleanroom workbench is built as a modular production station rather than a simple table. A Type 304 stainless steel work surface mounts to a sealed powder-coated steel frame with enclosed cable and utility routing. Rear uprights can carry task lighting, tool rails and shelves without drilling the primary work area. Height, leg format and airflow-friendly perforation patterns can be selected around the operator, process equipment and room airflow direction.
Основные характеристики
Enclosed cable channels separate power and data leads from routine wipe-down surfaces.
Low-shedding frame coatings and sealed end caps prevent exposed raw metal and hollow cavities.
Modular drawers, monitor arms and tool rails can be rearranged as the production step changes.
Обеспокоенность клиентов продуктами
Clean processes often outgrow generic benches because tools, cables and operator accessories accumulate directly on the work surface.
Loose cables cross the work zone and create repeated wiping obstacles.Rear service channels route power and data away from the process surface.
Fixed shelves force operators to work around poorly positioned tools.Adjustable uprights let accessories move vertically and laterally without modifying the top.
Painted industrial frames chip under disinfectant and repeated impact.Cleanroom powder coating or stainless construction protects sealed frame surfaces.
One standard height does not fit seated inspection and standing assembly tasks.Fixed, telescoping or powered height bases match the intended operator posture.
Типичные приложения
Clean assembly cellsPharmaceutical packagingOptics inspectionBiotechnology laboratoriesSemiconductor support areas
Технические параметры
Typical configurable specifications for a modular cleanroom workbench are listed below.
| Основной материал | Type 304 stainless steel work surface on a sealed powder-coated steel modular frame |
|---|---|
| Толщина панели | 1.2–2.0 mm stainless worktop skin on a 30–40 mm reinforced assembly |
| эффективная ширина | 600–900 mm work surface depth |
| Максимальная длина | 2400 mm |
| Толщина линий стали | 1.0–1.5 mm for stainless skins and enclosed service panels |
| Плотность ядра | 7900–8030 kg/m³ for the stainless steel worktop |
| Теплопроводимость | 14–17 W/(m·K) for the Type 304 stainless steel worktop |
| Поверхностная отделка | Brushed stainless steel top with light-gray or blue cleanroom powder-coated frame |
| Объединенный тип | Bolted modular accessory frame with sealed worktop-to-base connections |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Manual or electric height adjustmentCompact laminate, epoxy resin or perforated stainless worktopTask lighting and power railDrawers and cantilever shelves
Planning a Cleanroom Workbench specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
