English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أثاث الغرف النظيفة ومنتجات الفولاذ المقاوم للصدأ
منضدة العمل في غرفة نظيفة
A configurable cleanroom workstation that organizes tools, power and process accessories around a smooth low-shedding work surface.
- Modular accessory uprights
- Cleanable low-shedding surfaces
- Concealed service routing
- Fixed or height-adjustable frame
مقدمة المنتج
The cleanroom workbench is built as a modular production station rather than a simple table. A Type 304 stainless steel work surface mounts to a sealed powder-coated steel frame with enclosed cable and utility routing. Rear uprights can carry task lighting, tool rails and shelves without drilling the primary work area. Height, leg format and airflow-friendly perforation patterns can be selected around the operator, process equipment and room airflow direction.
الخصائص الرئيسية
Enclosed cable channels separate power and data leads from routine wipe-down surfaces.
Low-shedding frame coatings and sealed end caps prevent exposed raw metal and hollow cavities.
Modular drawers, monitor arms and tool rails can be rearranged as the production step changes.
مخاوف المنتج للعملاء
Clean processes often outgrow generic benches because tools, cables and operator accessories accumulate directly on the work surface.
Loose cables cross the work zone and create repeated wiping obstacles.Rear service channels route power and data away from the process surface.
Fixed shelves force operators to work around poorly positioned tools.Adjustable uprights let accessories move vertically and laterally without modifying the top.
Painted industrial frames chip under disinfectant and repeated impact.Cleanroom powder coating or stainless construction protects sealed frame surfaces.
One standard height does not fit seated inspection and standing assembly tasks.Fixed, telescoping or powered height bases match the intended operator posture.
تطبيقات نموذجية
Clean assembly cellsPharmaceutical packagingOptics inspectionمختبرات التكنولوجيا الحيويةSemiconductor support areas
المعلمات الفنية
Typical configurable specifications for a modular cleanroom workbench are listed below.
| المواد الأساسية | Type 304 stainless steel work surface on a sealed powder-coated steel modular frame |
|---|---|
| سمك اللوحة | 1.2–2.0 mm stainless worktop skin on a 30–40 mm reinforced assembly |
| العرض الفعال | 600–900 mm work surface depth |
| الحد الأقصى الطول | 2400 mm |
| الصلب يواجه سمك | 1.0–1.5 mm for stainless skins and enclosed service panels |
| الكثافة الأساسية | 7900–8030 kg/m³ for the stainless steel worktop |
| الموصلية الحرارية | 14–17 W/(m·K) for the Type 304 stainless steel worktop |
| إنهاء السطح | Brushed stainless steel top with light-gray or blue cleanroom powder-coated frame |
| نوع المشترك | Bolted modular accessory frame with sealed worktop-to-base connections |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Manual or electric height adjustmentCompact laminate, epoxy resin or perforated stainless worktopTask lighting and power railDrawers and cantilever shelves
Planning a Cleanroom Workbench specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
