İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Mobilyaları ve Paslanmaz Çelik Ürünleri
Temizlik Odası Workbench
A configurable cleanroom workstation that organizes tools, power and process accessories around a smooth low-shedding work surface.
- Modular accessory uprights
- Cleanable low-shedding surfaces
- Concealed service routing
- Fixed or height-adjustable frame
Ürün tanıtımı
The cleanroom workbench is built as a modular production station rather than a simple table. A Type 304 stainless steel work surface mounts to a sealed powder-coated steel frame with enclosed cable and utility routing. Rear uprights can carry task lighting, tool rails and shelves without drilling the primary work area. Height, leg format and airflow-friendly perforation patterns can be selected around the operator, process equipment and room airflow direction.
Ana Özellikler
Enclosed cable channels separate power and data leads from routine wipe-down surfaces.
Low-shedding frame coatings and sealed end caps prevent exposed raw metal and hollow cavities.
Modular drawers, monitor arms and tool rails can be rearranged as the production step changes.
Müşteri Ürün Sorunları
Clean processes often outgrow generic benches because tools, cables and operator accessories accumulate directly on the work surface.
Loose cables cross the work zone and create repeated wiping obstacles.Rear service channels route power and data away from the process surface.
Fixed shelves force operators to work around poorly positioned tools.Adjustable uprights let accessories move vertically and laterally without modifying the top.
Painted industrial frames chip under disinfectant and repeated impact.Cleanroom powder coating or stainless construction protects sealed frame surfaces.
One standard height does not fit seated inspection and standing assembly tasks.Fixed, telescoping or powered height bases match the intended operator posture.
Tipik uygulamalar
Clean assembly cellsPharmaceutical packagingOptics inspectionBiyoteknoloji LaboratuvarlarıSemiconductor support areas
Teknik parametreler
Typical configurable specifications for a modular cleanroom workbench are listed below.
| Temel malzemeler | Type 304 stainless steel work surface on a sealed powder-coated steel modular frame |
|---|---|
| Panel kalınlığı | 1.2–2.0 mm stainless worktop skin on a 30–40 mm reinforced assembly |
| Effective Width (Etkili Genişlik) | 600–900 mm work surface depth |
| Maksimum uzunluk | 2400 mm |
| Çelik yüz yüze kalınlığı | 1.0–1.5 mm for stainless skins and enclosed service panels |
| Core Density (Çekirdek Yoğunluğu) | 7900–8030 kg/m³ for the stainless steel worktop |
| Termal İletkenlik | 14–17 W/(m·K) for the Type 304 stainless steel worktop |
| Yüzey bitirme | Brushed stainless steel top with light-gray or blue cleanroom powder-coated frame |
| Ortak tip | Bolted modular accessory frame with sealed worktop-to-base connections |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Manual or electric height adjustmentCompact laminate, epoxy resin or perforated stainless worktopTask lighting and power railDrawers and cantilever shelves
Planning a Cleanroom Workbench specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
