Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Vestuário para sala limpa, EPI e consumíveis
Z Sala limpa Plastic Tray
Natural white polypropylene cleanroom tray with a smooth radiused interior, reinforced rim and stackable shallow profile for controlled parts handling.
- Smooth polypropylene contact surfaces simplify wipe-down cleaning
- Shallow reinforced walls support organized parts handling
- Stackable footprint uses bench and storage space efficiently
Introdução do produto
The Cleanroom Plastic Tray is formed from chemically resistant polypropylene with a one-piece body and rounded internal corners. Its shallow walls keep components visible and accessible, while the reinforced upper rim limits flex during transfer. A stable flat base and smooth, nonporous finish support repeat cleaning and orderly movement between process steps.
Características-chave
Radiused corners reduce residue traps and simplify wiping
Reinforced rim improves rigidity when the tray is lifted
Shallow walls provide clear visibility of small parts and tools
Nesting or stackable geometries can be selected for storage workflow
Preocupações do produto do cliente
Open trays must balance access, containment and cleanability. Deep corners can retain residues, overloaded trays can flex, and poorly matched plastics may be affected by aggressive cleaning agents.
Small parts may slide or mix during transfer.Use removable clean dividers or a dedicated cavity layout when needed.
Scratched surfaces can become difficult to inspect and clean.Replace visibly damaged trays and avoid abrasive cleaning tools.
Thin trays may distort under concentrated loads.Select wall thickness and ribbing for the expected payload.
Residual disinfectant can collect in sharp internal corners.Specify generous internal radii and drain the tray after wiping.
Aplicações típicas
For moving and staging vials, clean tools, small molded parts, medical-device components, semiconductor accessories and inspection samples on clean benches and production carts.
Parâmetros técnicos
The following ranges cover common reusable polypropylene handling trays. Dimensions, wall thickness, dividers and color should be chosen for the payload and cleaning chemistry.
| Material principal | Natural homopolymer or copolymer polypropylene |
|---|---|
| Painel de espessura | 1.5-3.0 mm nominal wall thickness |
| Largura efetiva | 180-600 mm tray width |
| Comprimento máximo | 800 mm tray length |
| Aço enfrentando espessura | 0 mm; one-piece polymer tray |
| Densidade Core | 900-920 kg/m³ polypropylene |
| Condutividade térmica | 0.10-0.22 W/(m·K), resin dependent |
| Superfície acabado | Smooth natural white molded finish with radiused corners |
| Tipo conjunto | Seamless injection-molded or thermoformed one-piece body |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Natural white, blue or static-control resinSolid, ribbed or compartmented baseRemovable dividers and fitted lidNesting or positive-stacking geometryAutoclavable resin grade where requiredCustom dimensions and molded identification area
Planning a Cleanroom Plastic Tray specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
