White polypropylene cleanroom tray in complete three-quarter view

クリーンルーム衣料品、 PPE 、消耗品

クリーンルームプラスチックトレイ

Natural white polypropylene cleanroom tray with a smooth radiused interior, reinforced rim and stackable shallow profile for controlled parts handling.

Smooth polypropylene contact surfaces simplify wipe-down cleaning
Shallow reinforced walls support organized parts handling
Stackable footprint uses bench and storage space efficiently

見積もりリクエスト製品案内

商品紹介

The Cleanroom Plastic Tray is formed from chemically resistant polypropylene with a one-piece body and rounded internal corners. Its shallow walls keep components visible and accessible, while the reinforced upper rim limits flex during transfer. A stable flat base and smooth, nonporous finish support repeat cleaning and orderly movement between process steps.

主要な特徴

One-piece polypropylene body avoids exposed fasteners or seams

Radiused corners reduce residue traps and simplify wiping

Reinforced rim improves rigidity when the tray is lifted

Shallow walls provide clear visibility of small parts and tools

Nesting or stackable geometries can be selected for storage workflow

お客様の製品に関する懸念事項

Open trays must balance access, containment and cleanability. Deep corners can retain residues, overloaded trays can flex, and poorly matched plastics may be affected by aggressive cleaning agents.

Small parts may slide or mix during transfer.Use removable clean dividers or a dedicated cavity layout when needed.

Scratched surfaces can become difficult to inspect and clean.Replace visibly damaged trays and avoid abrasive cleaning tools.

Thin trays may distort under concentrated loads.Select wall thickness and ribbing for the expected payload.

Residual disinfectant can collect in sharp internal corners.Specify generous internal radii and drain the tray after wiping.

典型的な用途

For moving and staging vials, clean tools, small molded parts, medical-device components, semiconductor accessories and inspection samples on clean benches and production carts.

技術的なパラメータ

The following ranges cover common reusable polypropylene handling trays. Dimensions, wall thickness, dividers and color should be chosen for the payload and cleaning chemistry.

コア材料	Natural homopolymer or copolymer polypropylene
パネルの厚さ	1.5-3.0 mm nominal wall thickness
有効幅	180-600 mm tray width
最大長さ	800 mm tray length
鋼鉄の厚さを直面する	0 mm; one-piece polymer tray
コア密度	900-920 kg/m³ polypropylene
熱伝導率	0.10-0.22 W/(m·K), resin dependent
表面仕上げ	Smooth natural white molded finish with radiused corners
ジョイントタイプ	Seamless injection-molded or thermoformed one-piece body
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Natural white, blue or static-control resinSolid, ribbed or compartmented baseRemovable dividers and fitted lidNesting or positive-stacking geometryAutoclavable resin grade where requiredCustom dimensions and molded identification area

Planning a Cleanroom Plastic Tray specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する