English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Одежда для чистых комнат, ИПП и расходные материалы
Пластиковый лоток для чистой комнаты
Natural white polypropylene cleanroom tray with a smooth radiused interior, reinforced rim and stackable shallow profile for controlled parts handling.
- Smooth polypropylene contact surfaces simplify wipe-down cleaning
- Shallow reinforced walls support organized parts handling
- Stackable footprint uses bench and storage space efficiently
Введение продукции
The Cleanroom Plastic Tray is formed from chemically resistant polypropylene with a one-piece body and rounded internal corners. Its shallow walls keep components visible and accessible, while the reinforced upper rim limits flex during transfer. A stable flat base and smooth, nonporous finish support repeat cleaning and orderly movement between process steps.
Основные характеристики
Radiused corners reduce residue traps and simplify wiping
Reinforced rim improves rigidity when the tray is lifted
Shallow walls provide clear visibility of small parts and tools
Nesting or stackable geometries can be selected for storage workflow
Обеспокоенность клиентов продуктами
Open trays must balance access, containment and cleanability. Deep corners can retain residues, overloaded trays can flex, and poorly matched plastics may be affected by aggressive cleaning agents.
Small parts may slide or mix during transfer.Use removable clean dividers or a dedicated cavity layout when needed.
Scratched surfaces can become difficult to inspect and clean.Replace visibly damaged trays and avoid abrasive cleaning tools.
Thin trays may distort under concentrated loads.Select wall thickness and ribbing for the expected payload.
Residual disinfectant can collect in sharp internal corners.Specify generous internal radii and drain the tray after wiping.
Типичные приложения
For moving and staging vials, clean tools, small molded parts, medical-device components, semiconductor accessories and inspection samples on clean benches and production carts.
Технические параметры
The following ranges cover common reusable polypropylene handling trays. Dimensions, wall thickness, dividers and color should be chosen for the payload and cleaning chemistry.
| Основной материал | Natural homopolymer or copolymer polypropylene |
|---|---|
| Толщина панели | 1.5-3.0 mm nominal wall thickness |
| эффективная ширина | 180-600 mm tray width |
| Максимальная длина | 800 mm tray length |
| Толщина линий стали | 0 mm; one-piece polymer tray |
| Плотность ядра | 900-920 kg/m³ polypropylene |
| Теплопроводимость | 0.10-0.22 W/(m·K), resin dependent |
| Поверхностная отделка | Smooth natural white molded finish with radiused corners |
| Объединенный тип | Seamless injection-molded or thermoformed one-piece body |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Natural white, blue or static-control resinSolid, ribbed or compartmented baseRemovable dividers and fitted lidNesting or positive-stacking geometryAutoclavable resin grade where requiredCustom dimensions and molded identification area
Planning a Cleanroom Plastic Tray specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
