Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Vêtements de salle blanche, EPI et consommables
Cleanroom Plastic Tray par
Natural white polypropylene cleanroom tray with a smooth radiused interior, reinforced rim and stackable shallow profile for controlled parts handling.
- Smooth polypropylene contact surfaces simplify wipe-down cleaning
- Shallow reinforced walls support organized parts handling
- Stackable footprint uses bench and storage space efficiently
Introduction de produit
The Cleanroom Plastic Tray is formed from chemically resistant polypropylene with a one-piece body and rounded internal corners. Its shallow walls keep components visible and accessible, while the reinforced upper rim limits flex during transfer. A stable flat base and smooth, nonporous finish support repeat cleaning and orderly movement between process steps.
Key Features
Radiused corners reduce residue traps and simplify wiping
Reinforced rim improves rigidity when the tray is lifted
Shallow walls provide clear visibility of small parts and tools
Nesting or stackable geometries can be selected for storage workflow
Préoccupations du client produit
Open trays must balance access, containment and cleanability. Deep corners can retain residues, overloaded trays can flex, and poorly matched plastics may be affected by aggressive cleaning agents.
Small parts may slide or mix during transfer.Use removable clean dividers or a dedicated cavity layout when needed.
Scratched surfaces can become difficult to inspect and clean.Replace visibly damaged trays and avoid abrasive cleaning tools.
Thin trays may distort under concentrated loads.Select wall thickness and ribbing for the expected payload.
Residual disinfectant can collect in sharp internal corners.Specify generous internal radii and drain the tray after wiping.
Les applications typiques
For moving and staging vials, clean tools, small molded parts, medical-device components, semiconductor accessories and inspection samples on clean benches and production carts.
Paramètres techniques
The following ranges cover common reusable polypropylene handling trays. Dimensions, wall thickness, dividers and color should be chosen for the payload and cleaning chemistry.
| Matériaux de base | Natural homopolymer or copolymer polypropylene |
|---|---|
| Panneau épaisseur | 1.5-3.0 mm nominal wall thickness |
| Largeur effective | 180-600 mm tray width |
| Longueur maximale | 800 mm tray length |
| Acier face épaisseur | 0 mm; one-piece polymer tray |
| Densité Core | 900-920 kg/m³ polypropylene |
| Conductivité thermique | 0.10-0.22 W/(m·K), resin dependent |
| surface finie | Smooth natural white molded finish with radiused corners |
| Type joint | Seamless injection-molded or thermoformed one-piece body |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Natural white, blue or static-control resinSolid, ribbed or compartmented baseRemovable dividers and fitted lidNesting or positive-stacking geometryAutoclavable resin grade where requiredCustom dimensions and molded identification area
Planning a Cleanroom Plastic Tray specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
