White polypropylene cleanroom tray in complete three-quarter view

Garmen Cleanroom, PPE dan Consumables

Cleanroom Plastic Tray (Baki Plastik Ruang Bersih)

Natural white polypropylene cleanroom tray with a smooth radiused interior, reinforced rim and stackable shallow profile for controlled parts handling.

Smooth polypropylene contact surfaces simplify wipe-down cleaning
Shallow reinforced walls support organized parts handling
Stackable footprint uses bench and storage space efficiently

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The Cleanroom Plastic Tray is formed from chemically resistant polypropylene with a one-piece body and rounded internal corners. Its shallow walls keep components visible and accessible, while the reinforced upper rim limits flex during transfer. A stable flat base and smooth, nonporous finish support repeat cleaning and orderly movement between process steps.

Fitur utama:

One-piece polypropylene body avoids exposed fasteners or seams

Radiused corners reduce residue traps and simplify wiping

Reinforced rim improves rigidity when the tray is lifted

Shallow walls provide clear visibility of small parts and tools

Nesting or stackable geometries can be selected for storage workflow

Kekhawatiran produk pelanggan

Open trays must balance access, containment and cleanability. Deep corners can retain residues, overloaded trays can flex, and poorly matched plastics may be affected by aggressive cleaning agents.

Small parts may slide or mix during transfer.Use removable clean dividers or a dedicated cavity layout when needed.

Scratched surfaces can become difficult to inspect and clean.Replace visibly damaged trays and avoid abrasive cleaning tools.

Thin trays may distort under concentrated loads.Select wall thickness and ribbing for the expected payload.

Residual disinfectant can collect in sharp internal corners.Specify generous internal radii and drain the tray after wiping.

Aplikasi yang Tipis

For moving and staging vials, clean tools, small molded parts, medical-device components, semiconductor accessories and inspection samples on clean benches and production carts.

Parameter teknis

The following ranges cover common reusable polypropylene handling trays. Dimensions, wall thickness, dividers and color should be chosen for the payload and cleaning chemistry.

Bahan inti	Natural homopolymer or copolymer polypropylene
Ketebalan Panel (Panel Thickness)	1.5-3.0 mm nominal wall thickness
Efektif lebar	180-600 mm tray width
Panjang maksimum	800 mm tray length
Baja menghadap ketebalan	0 mm; one-piece polymer tray
Kepadatan inti (core density)	900-920 kg/m³ polypropylene
Konduktivitas Termal (Thermal Conductivity)	0.10-0.22 W/(m·K), resin dependent
Permukaan selesai	Smooth natural white molded finish with radiused corners
Jenis Bersama	Seamless injection-molded or thermoformed one-piece body
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Natural white, blue or static-control resinSolid, ribbed or compartmented baseRemovable dividers and fitted lidNesting or positive-stacking geometryAutoclavable resin grade where requiredCustom dimensions and molded identification area

Planning a Cleanroom Plastic Tray specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami