White polypropylene cleanroom tray in complete three-quarter view

클린룸 의류, PPE 및 소모품

클린룸 플라스틱 트레이

Natural white polypropylene cleanroom tray with a smooth radiused interior, reinforced rim and stackable shallow profile for controlled parts handling.

Smooth polypropylene contact surfaces simplify wipe-down cleaning
Shallow reinforced walls support organized parts handling
Stackable footprint uses bench and storage space efficiently

견적 요청 제품 찾아보기

상품 소개

The Cleanroom Plastic Tray is formed from chemically resistant polypropylene with a one-piece body and rounded internal corners. Its shallow walls keep components visible and accessible, while the reinforced upper rim limits flex during transfer. A stable flat base and smooth, nonporous finish support repeat cleaning and orderly movement between process steps.

주요 기능

One-piece polypropylene body avoids exposed fasteners or seams

Radiused corners reduce residue traps and simplify wiping

Reinforced rim improves rigidity when the tray is lifted

Shallow walls provide clear visibility of small parts and tools

Nesting or stackable geometries can be selected for storage workflow

고객 제품 관심사

Open trays must balance access, containment and cleanability. Deep corners can retain residues, overloaded trays can flex, and poorly matched plastics may be affected by aggressive cleaning agents.

Small parts may slide or mix during transfer.Use removable clean dividers or a dedicated cavity layout when needed.

Scratched surfaces can become difficult to inspect and clean.Replace visibly damaged trays and avoid abrasive cleaning tools.

Thin trays may distort under concentrated loads.Select wall thickness and ribbing for the expected payload.

Residual disinfectant can collect in sharp internal corners.Specify generous internal radii and drain the tray after wiping.

일반적인 응용 프로그램

For moving and staging vials, clean tools, small molded parts, medical-device components, semiconductor accessories and inspection samples on clean benches and production carts.

기술 매개변수

The following ranges cover common reusable polypropylene handling trays. Dimensions, wall thickness, dividers and color should be chosen for the payload and cleaning chemistry.

핵심 재료	Natural homopolymer or copolymer polypropylene
패널 두께	1.5-3.0 mm nominal wall thickness
유효 폭	180-600 mm tray width
최대 길이	800 mm tray length
강철 면면 두께	0 mm; one-piece polymer tray
코어 밀도	900-920 kg/m³ polypropylene
열전도도 (Thermal Conductivity)	0.10-0.22 W/(m·K), resin dependent
표면 마무리	Smooth natural white molded finish with radiused corners
접합 유형	Seamless injection-molded or thermoformed one-piece body
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Natural white, blue or static-control resinSolid, ribbed or compartmented baseRemovable dividers and fitted lidNesting or positive-stacking geometryAutoclavable resin grade where requiredCustom dimensions and molded identification area

Planning a Cleanroom Plastic Tray specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.