English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
ملابس الغرف النظيفة، PPE والمواد الاستهلاكية
غرفة نظيفة علبة بلاستيكية
Natural white polypropylene cleanroom tray with a smooth radiused interior, reinforced rim and stackable shallow profile for controlled parts handling.
- Smooth polypropylene contact surfaces simplify wipe-down cleaning
- Shallow reinforced walls support organized parts handling
- Stackable footprint uses bench and storage space efficiently
مقدمة المنتج
The Cleanroom Plastic Tray is formed from chemically resistant polypropylene with a one-piece body and rounded internal corners. Its shallow walls keep components visible and accessible, while the reinforced upper rim limits flex during transfer. A stable flat base and smooth, nonporous finish support repeat cleaning and orderly movement between process steps.
الخصائص الرئيسية
Radiused corners reduce residue traps and simplify wiping
Reinforced rim improves rigidity when the tray is lifted
Shallow walls provide clear visibility of small parts and tools
Nesting or stackable geometries can be selected for storage workflow
مخاوف المنتج للعملاء
Open trays must balance access, containment and cleanability. Deep corners can retain residues, overloaded trays can flex, and poorly matched plastics may be affected by aggressive cleaning agents.
Small parts may slide or mix during transfer.Use removable clean dividers or a dedicated cavity layout when needed.
Scratched surfaces can become difficult to inspect and clean.Replace visibly damaged trays and avoid abrasive cleaning tools.
Thin trays may distort under concentrated loads.Select wall thickness and ribbing for the expected payload.
Residual disinfectant can collect in sharp internal corners.Specify generous internal radii and drain the tray after wiping.
تطبيقات نموذجية
For moving and staging vials, clean tools, small molded parts, medical-device components, semiconductor accessories and inspection samples on clean benches and production carts.
المعلمات الفنية
The following ranges cover common reusable polypropylene handling trays. Dimensions, wall thickness, dividers and color should be chosen for the payload and cleaning chemistry.
| المواد الأساسية | Natural homopolymer or copolymer polypropylene |
|---|---|
| سمك اللوحة | 1.5-3.0 mm nominal wall thickness |
| العرض الفعال | 180-600 mm tray width |
| الحد الأقصى الطول | 800 mm tray length |
| الصلب يواجه سمك | 0 mm; one-piece polymer tray |
| الكثافة الأساسية | 900-920 kg/m³ polypropylene |
| الموصلية الحرارية | 0.10-0.22 W/(m·K), resin dependent |
| إنهاء السطح | Smooth natural white molded finish with radiused corners |
| نوع المشترك | Seamless injection-molded or thermoformed one-piece body |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Natural white, blue or static-control resinSolid, ribbed or compartmented baseRemovable dividers and fitted lidNesting or positive-stacking geometryAutoclavable resin grade where requiredCustom dimensions and molded identification area
Planning a Cleanroom Plastic Tray specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
