Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Iluminação de sala limpa e equipamentos elétricos
Z Sala limpa LED Panel Light
A low-profile LED panel that combines an edge-lit or back-lit optical stack with a sealed, wipe-clean white frame.
- Slim Flat-Panel Body
- Uniform Low-Glare Face
- Cleanable White Frame
- Modular Ceiling Fit
Introdução do produto
The panel light uses a shallow aluminum frame around a layered optical assembly consisting of a diffuser, light guide or back-lit lens, reflector and LED source. Its broad luminous surface reduces harsh brightness gradients in low-ceiling cleanrooms. A sealed front perimeter and enclosed rear cover prevent exposed optical layers, while the external driver can be positioned above the ceiling for heat separation and service access.
Características-chave
The shallow body preserves space for ducts and filter housings above the ceiling.
A rigid aluminum frame keeps the diffuser flat and evenly compressed.
The enclosed rear plate shields the optical stack from plenum dust.
A remote driver option keeps serviceable electronics outside the sealed face.
Preocupações do produto do cliente
Flat panel lights must remain visibly uniform while their slim edge and ceiling joint withstand repeated wiping.
Consumer office panels flex and open at the frame corners.A reinforced extruded frame and sealed corner joints retain the optical stack.
Bright LED spots remain visible through a thin diffuser.A matched diffuser and light-distribution layer blend the source across the full face.
A bulky fixture conflicts with crowded ceiling services.Low-profile panel construction minimizes the depth occupied above the grid.
Dust enters from an open rear plate and marks the lens.A closed metal back cover isolates the internal optical layers.
Aplicações típicas
Clean assembly ceilingsSalas de preparação hospitalarLaboratory corridorsElectronics inspection areas
Parâmetros técnicos
Typical configurable construction ranges for a cleanroom LED panel light are listed below.
| Material principal | Extruded aluminum perimeter, LED optical stack and opal PMMA or polycarbonate diffuser |
|---|---|
| Painel de espessura | 32-65 mm overall panel body thickness |
| Largura efetiva | 595-620 mm nominal luminous module width |
| Comprimento máximo | Up to 1220 mm overall panel length |
| Aço enfrentando espessura | 0.5-0.8 mm powder-coated steel rear cover |
| Densidade Core | Approximately 1180 kg/m³ for the PMMA light-guide or diffuser layer |
| Condutividade térmica | 0.19 W/(m·K) for the PMMA optical layer |
| Superfície acabado | White powder-coated or anodized frame with a smooth opal luminous surface |
| Tipo conjunto | Crimped or screwed perimeter frame with sealed corners and compressible ceiling gasket |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Edge-lit or back-lit optical system300 x 1200 mm and 600 x 600 mm modulesEmergency driver packSelectable color temperature
Planning a Cleanroom LED Panel Light specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
