Cleanroom LED panel light shown as a complete slim square fixture

クリーンルーム照明 · 電気機器

クリーンルーム LED パネルライト

A low-profile LED panel that combines an edge-lit or back-lit optical stack with a sealed, wipe-clean white frame.

Slim Flat-Panel Body
Uniform Low-Glare Face
Cleanable White Frame
Modular Ceiling Fit

商品紹介

The panel light uses a shallow aluminum frame around a layered optical assembly consisting of a diffuser, light guide or back-lit lens, reflector and LED source. Its broad luminous surface reduces harsh brightness gradients in low-ceiling cleanrooms. A sealed front perimeter and enclosed rear cover prevent exposed optical layers, while the external driver can be positioned above the ceiling for heat separation and service access.

主要な特徴

A full-panel luminous face gives consistent illumination over work areas.

The shallow body preserves space for ducts and filter housings above the ceiling.

A rigid aluminum frame keeps the diffuser flat and evenly compressed.

The enclosed rear plate shields the optical stack from plenum dust.

A remote driver option keeps serviceable electronics outside the sealed face.

お客様の製品に関する懸念事項

Flat panel lights must remain visibly uniform while their slim edge and ceiling joint withstand repeated wiping.

Consumer office panels flex and open at the frame corners.A reinforced extruded frame and sealed corner joints retain the optical stack.

Bright LED spots remain visible through a thin diffuser.A matched diffuser and light-distribution layer blend the source across the full face.

A bulky fixture conflicts with crowded ceiling services.Low-profile panel construction minimizes the depth occupied above the grid.

Dust enters from an open rear plate and marks the lens.A closed metal back cover isolates the internal optical layers.

典型的な用途

Clean assembly ceilings病院準備室研究室の廊下Electronics inspection areas

技術的なパラメータ

Typical configurable construction ranges for a cleanroom LED panel light are listed below.

コア材料	Extruded aluminum perimeter, LED optical stack and opal PMMA or polycarbonate diffuser
パネルの厚さ	32-65 mm overall panel body thickness
有効幅	595-620 mm nominal luminous module width
最大長さ	Up to 1220 mm overall panel length
鋼鉄の厚さを直面する	0.5-0.8 mm powder-coated steel rear cover
コア密度	Approximately 1180 kg/m³ for the PMMA light-guide or diffuser layer
熱伝導率	0.19 W/(m·K) for the PMMA optical layer
表面仕上げ	White powder-coated or anodized frame with a smooth opal luminous surface
ジョイントタイプ	Crimped or screwed perimeter frame with sealed corners and compressible ceiling gasket
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Edge-lit or back-lit optical system300 x 1200 mm and 600 x 600 mm modulesEmergency driver packSelectable color temperature

Planning a Cleanroom LED Panel Light specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する