Cleanroom LED panel light shown as a complete slim square fixture

Pencahayaan bilik bersih dan peralatan elektrik

Bilik Bersih LED Panel Lampu

A low-profile LED panel that combines an edge-lit or back-lit optical stack with a sealed, wipe-clean white frame.

Slim Flat-Panel Body
Uniform Low-Glare Face
Cleanable White Frame
Modular Ceiling Fit

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The panel light uses a shallow aluminum frame around a layered optical assembly consisting of a diffuser, light guide or back-lit lens, reflector and LED source. Its broad luminous surface reduces harsh brightness gradients in low-ceiling cleanrooms. A sealed front perimeter and enclosed rear cover prevent exposed optical layers, while the external driver can be positioned above the ceiling for heat separation and service access.

Ciri-ciri Utama

A full-panel luminous face gives consistent illumination over work areas.

The shallow body preserves space for ducts and filter housings above the ceiling.

A rigid aluminum frame keeps the diffuser flat and evenly compressed.

The enclosed rear plate shields the optical stack from plenum dust.

A remote driver option keeps serviceable electronics outside the sealed face.

Kebimbangan Produk Pelanggan

Flat panel lights must remain visibly uniform while their slim edge and ceiling joint withstand repeated wiping.

Consumer office panels flex and open at the frame corners.A reinforced extruded frame and sealed corner joints retain the optical stack.

Bright LED spots remain visible through a thin diffuser.A matched diffuser and light-distribution layer blend the source across the full face.

A bulky fixture conflicts with crowded ceiling services.Low-profile panel construction minimizes the depth occupied above the grid.

Dust enters from an open rear plate and marks the lens.A closed metal back cover isolates the internal optical layers.

Permohonan yang biasa

Clean assembly ceilingsBilik persediaan hospitalKoridor MakmalElectronics inspection areas

Parameter teknikal

Typical configurable construction ranges for a cleanroom LED panel light are listed below.

Bahan Teras	Extruded aluminum perimeter, LED optical stack and opal PMMA or polycarbonate diffuser
Ketebalan Panel	32-65 mm overall panel body thickness
Lebar berkesan	595-620 mm nominal luminous module width
Panjang maksimum	Up to 1220 mm overall panel length
Keluli Menghadapi Ketebalan	0.5-0.8 mm powder-coated steel rear cover
Ketumpatan teras	Approximately 1180 kg/m³ for the PMMA light-guide or diffuser layer
Kekonduksian Terma	0.19 W/(m·K) for the PMMA optical layer
Kemasan permukaan	White powder-coated or anodized frame with a smooth opal luminous surface
Jenis Bersatu	Crimped or screwed perimeter frame with sealed corners and compressible ceiling gasket
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Edge-lit or back-lit optical system300 x 1200 mm and 600 x 600 mm modulesEmergency driver packSelectable color temperature

Planning a Cleanroom LED Panel Light specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami