Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Iluminación de sala limpia y equipos eléctricos
Sala limpia LED Panel Luz
A low-profile LED panel that combines an edge-lit or back-lit optical stack with a sealed, wipe-clean white frame.
- Slim Flat-Panel Body
- Uniform Low-Glare Face
- Cleanable White Frame
- Modular Ceiling Fit
Introducción del producto
The panel light uses a shallow aluminum frame around a layered optical assembly consisting of a diffuser, light guide or back-lit lens, reflector and LED source. Its broad luminous surface reduces harsh brightness gradients in low-ceiling cleanrooms. A sealed front perimeter and enclosed rear cover prevent exposed optical layers, while the external driver can be positioned above the ceiling for heat separation and service access.
Características clave
The shallow body preserves space for ducts and filter housings above the ceiling.
A rigid aluminum frame keeps the diffuser flat and evenly compressed.
The enclosed rear plate shields the optical stack from plenum dust.
A remote driver option keeps serviceable electronics outside the sealed face.
Preocupaciones del producto del cliente
Flat panel lights must remain visibly uniform while their slim edge and ceiling joint withstand repeated wiping.
Consumer office panels flex and open at the frame corners.A reinforced extruded frame and sealed corner joints retain the optical stack.
Bright LED spots remain visible through a thin diffuser.A matched diffuser and light-distribution layer blend the source across the full face.
A bulky fixture conflicts with crowded ceiling services.Low-profile panel construction minimizes the depth occupied above the grid.
Dust enters from an open rear plate and marks the lens.A closed metal back cover isolates the internal optical layers.
Aplicaciones típicas
Clean assembly ceilingsSalas de preparación hospitalariaLaboratory corridorsElectronics inspection areas
Parámetros técnicos
Typical configurable construction ranges for a cleanroom LED panel light are listed below.
| Materiales Core | Extruded aluminum perimeter, LED optical stack and opal PMMA or polycarbonate diffuser |
|---|---|
| Panel de espesor | 32-65 mm overall panel body thickness |
| Ancho efectivo | 595-620 mm nominal luminous module width |
| Longitud máxima | Up to 1220 mm overall panel length |
| Acero frente a espesor | 0.5-0.8 mm powder-coated steel rear cover |
| Densidad Core | Approximately 1180 kg/m³ for the PMMA light-guide or diffuser layer |
| Conductividad térmica | 0.19 W/(m·K) for the PMMA optical layer |
| Superficie acabada | White powder-coated or anodized frame with a smooth opal luminous surface |
| Tipo conjunto | Crimped or screwed perimeter frame with sealed corners and compressible ceiling gasket |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Edge-lit or back-lit optical system300 x 1200 mm and 600 x 600 mm modulesEmergency driver packSelectable color temperature
Planning a Cleanroom LED Panel Light specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
