Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Éclairage de salle blanche et équipements électriques
Cleanroom LED Panel Lumière
A low-profile LED panel that combines an edge-lit or back-lit optical stack with a sealed, wipe-clean white frame.
- Slim Flat-Panel Body
- Uniform Low-Glare Face
- Cleanable White Frame
- Modular Ceiling Fit
Introduction de produit
The panel light uses a shallow aluminum frame around a layered optical assembly consisting of a diffuser, light guide or back-lit lens, reflector and LED source. Its broad luminous surface reduces harsh brightness gradients in low-ceiling cleanrooms. A sealed front perimeter and enclosed rear cover prevent exposed optical layers, while the external driver can be positioned above the ceiling for heat separation and service access.
Key Features
The shallow body preserves space for ducts and filter housings above the ceiling.
A rigid aluminum frame keeps the diffuser flat and evenly compressed.
The enclosed rear plate shields the optical stack from plenum dust.
A remote driver option keeps serviceable electronics outside the sealed face.
Préoccupations du client produit
Flat panel lights must remain visibly uniform while their slim edge and ceiling joint withstand repeated wiping.
Consumer office panels flex and open at the frame corners.A reinforced extruded frame and sealed corner joints retain the optical stack.
Bright LED spots remain visible through a thin diffuser.A matched diffuser and light-distribution layer blend the source across the full face.
A bulky fixture conflicts with crowded ceiling services.Low-profile panel construction minimizes the depth occupied above the grid.
Dust enters from an open rear plate and marks the lens.A closed metal back cover isolates the internal optical layers.
Les applications typiques
Clean assembly ceilingsSalles de préparation hospitalièreCouloirs de laboratoire
parElectronics inspection areas
Paramètres techniques
Typical configurable construction ranges for a cleanroom LED panel light are listed below.
| Matériaux de base | Extruded aluminum perimeter, LED optical stack and opal PMMA or polycarbonate diffuser |
|---|---|
| Panneau épaisseur | 32-65 mm overall panel body thickness |
| Largeur effective | 595-620 mm nominal luminous module width |
| Longueur maximale | Up to 1220 mm overall panel length |
| Acier face épaisseur | 0.5-0.8 mm powder-coated steel rear cover |
| Densité Core | Approximately 1180 kg/m³ for the PMMA light-guide or diffuser layer |
| Conductivité thermique | 0.19 W/(m·K) for the PMMA optical layer |
| surface finie | White powder-coated or anodized frame with a smooth opal luminous surface |
| Type joint | Crimped or screwed perimeter frame with sealed corners and compressible ceiling gasket |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Edge-lit or back-lit optical system300 x 1200 mm and 600 x 600 mm modulesEmergency driver packSelectable color temperature
Planning a Cleanroom LED Panel Light specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
