English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
إضاءة الغرف النظيفة والمعدات الكهربائية
غرفة نظيفة LED لوحة ضوء
A low-profile LED panel that combines an edge-lit or back-lit optical stack with a sealed, wipe-clean white frame.
- Slim Flat-Panel Body
- Uniform Low-Glare Face
- Cleanable White Frame
- Modular Ceiling Fit
مقدمة المنتج
The panel light uses a shallow aluminum frame around a layered optical assembly consisting of a diffuser, light guide or back-lit lens, reflector and LED source. Its broad luminous surface reduces harsh brightness gradients in low-ceiling cleanrooms. A sealed front perimeter and enclosed rear cover prevent exposed optical layers, while the external driver can be positioned above the ceiling for heat separation and service access.
الخصائص الرئيسية
The shallow body preserves space for ducts and filter housings above the ceiling.
A rigid aluminum frame keeps the diffuser flat and evenly compressed.
The enclosed rear plate shields the optical stack from plenum dust.
A remote driver option keeps serviceable electronics outside the sealed face.
مخاوف المنتج للعملاء
Flat panel lights must remain visibly uniform while their slim edge and ceiling joint withstand repeated wiping.
Consumer office panels flex and open at the frame corners.A reinforced extruded frame and sealed corner joints retain the optical stack.
Bright LED spots remain visible through a thin diffuser.A matched diffuser and light-distribution layer blend the source across the full face.
A bulky fixture conflicts with crowded ceiling services.Low-profile panel construction minimizes the depth occupied above the grid.
Dust enters from an open rear plate and marks the lens.A closed metal back cover isolates the internal optical layers.
تطبيقات نموذجية
Clean assembly ceilingsغرف إعداد المستشفىLaboratory corridorsElectronics inspection areas
المعلمات الفنية
Typical configurable construction ranges for a cleanroom LED panel light are listed below.
| المواد الأساسية | Extruded aluminum perimeter, LED optical stack and opal PMMA or polycarbonate diffuser |
|---|---|
| سمك اللوحة | 32-65 mm overall panel body thickness |
| العرض الفعال | 595-620 mm nominal luminous module width |
| الحد الأقصى الطول | Up to 1220 mm overall panel length |
| الصلب يواجه سمك | 0.5-0.8 mm powder-coated steel rear cover |
| الكثافة الأساسية | Approximately 1180 kg/m³ for the PMMA light-guide or diffuser layer |
| الموصلية الحرارية | 0.19 W/(m·K) for the PMMA optical layer |
| إنهاء السطح | White powder-coated or anodized frame with a smooth opal luminous surface |
| نوع المشترك | Crimped or screwed perimeter frame with sealed corners and compressible ceiling gasket |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Edge-lit or back-lit optical system300 x 1200 mm and 600 x 600 mm modulesEmergency driver packSelectable color temperature
Planning a Cleanroom LED Panel Light specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
