İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Aydınlatma ve Elektrik Ekipmanları
Temiz oda LED Panel Işığı
A low-profile LED panel that combines an edge-lit or back-lit optical stack with a sealed, wipe-clean white frame.
- Slim Flat-Panel Body
- Uniform Low-Glare Face
- Cleanable White Frame
- Modular Ceiling Fit
Ürün tanıtımı
The panel light uses a shallow aluminum frame around a layered optical assembly consisting of a diffuser, light guide or back-lit lens, reflector and LED source. Its broad luminous surface reduces harsh brightness gradients in low-ceiling cleanrooms. A sealed front perimeter and enclosed rear cover prevent exposed optical layers, while the external driver can be positioned above the ceiling for heat separation and service access.
Ana Özellikler
The shallow body preserves space for ducts and filter housings above the ceiling.
A rigid aluminum frame keeps the diffuser flat and evenly compressed.
The enclosed rear plate shields the optical stack from plenum dust.
A remote driver option keeps serviceable electronics outside the sealed face.
Müşteri Ürün Sorunları
Flat panel lights must remain visibly uniform while their slim edge and ceiling joint withstand repeated wiping.
Consumer office panels flex and open at the frame corners.A reinforced extruded frame and sealed corner joints retain the optical stack.
Bright LED spots remain visible through a thin diffuser.A matched diffuser and light-distribution layer blend the source across the full face.
A bulky fixture conflicts with crowded ceiling services.Low-profile panel construction minimizes the depth occupied above the grid.
Dust enters from an open rear plate and marks the lens.A closed metal back cover isolates the internal optical layers.
Tipik uygulamalar
Clean assembly ceilingsHastane hazırlık odalarıLaboratory corridorsElectronics inspection areas
Teknik parametreler
Typical configurable construction ranges for a cleanroom LED panel light are listed below.
| Temel malzemeler | Extruded aluminum perimeter, LED optical stack and opal PMMA or polycarbonate diffuser |
|---|---|
| Panel kalınlığı | 32-65 mm overall panel body thickness |
| Effective Width (Etkili Genişlik) | 595-620 mm nominal luminous module width |
| Maksimum uzunluk | Up to 1220 mm overall panel length |
| Çelik yüz yüze kalınlığı | 0.5-0.8 mm powder-coated steel rear cover |
| Core Density (Çekirdek Yoğunluğu) | Approximately 1180 kg/m³ for the PMMA light-guide or diffuser layer |
| Termal İletkenlik | 0.19 W/(m·K) for the PMMA optical layer |
| Yüzey bitirme | White powder-coated or anodized frame with a smooth opal luminous surface |
| Ortak tip | Crimped or screwed perimeter frame with sealed corners and compressible ceiling gasket |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Edge-lit or back-lit optical system300 x 1200 mm and 600 x 600 mm modulesEmergency driver packSelectable color temperature
Planning a Cleanroom LED Panel Light specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
