Cleanroom LED panel light shown as a complete slim square fixture

클린룸 조명 및 전기 장비

클린룸 LED 패널 조명

A low-profile LED panel that combines an edge-lit or back-lit optical stack with a sealed, wipe-clean white frame.

Slim Flat-Panel Body
Uniform Low-Glare Face
Cleanable White Frame
Modular Ceiling Fit

견적 요청 제품 찾아보기

상품 소개

The panel light uses a shallow aluminum frame around a layered optical assembly consisting of a diffuser, light guide or back-lit lens, reflector and LED source. Its broad luminous surface reduces harsh brightness gradients in low-ceiling cleanrooms. A sealed front perimeter and enclosed rear cover prevent exposed optical layers, while the external driver can be positioned above the ceiling for heat separation and service access.

주요 기능

A full-panel luminous face gives consistent illumination over work areas.

The shallow body preserves space for ducts and filter housings above the ceiling.

A rigid aluminum frame keeps the diffuser flat and evenly compressed.

The enclosed rear plate shields the optical stack from plenum dust.

A remote driver option keeps serviceable electronics outside the sealed face.

고객 제품 관심사

Flat panel lights must remain visibly uniform while their slim edge and ceiling joint withstand repeated wiping.

Consumer office panels flex and open at the frame corners.A reinforced extruded frame and sealed corner joints retain the optical stack.

Bright LED spots remain visible through a thin diffuser.A matched diffuser and light-distribution layer blend the source across the full face.

A bulky fixture conflicts with crowded ceiling services.Low-profile panel construction minimizes the depth occupied above the grid.

Dust enters from an open rear plate and marks the lens.A closed metal back cover isolates the internal optical layers.

일반적인 응용 프로그램

Clean assembly ceilings병원 준비실Laboratory corridorsElectronics inspection areas

기술 매개변수

Typical configurable construction ranges for a cleanroom LED panel light are listed below.

핵심 재료	Extruded aluminum perimeter, LED optical stack and opal PMMA or polycarbonate diffuser
패널 두께	32-65 mm overall panel body thickness
유효 폭	595-620 mm nominal luminous module width
최대 길이	Up to 1220 mm overall panel length
강철 면면 두께	0.5-0.8 mm powder-coated steel rear cover
코어 밀도	Approximately 1180 kg/m³ for the PMMA light-guide or diffuser layer
열전도도 (Thermal Conductivity)	0.19 W/(m·K) for the PMMA optical layer
표면 마무리	White powder-coated or anodized frame with a smooth opal luminous surface
접합 유형	Crimped or screwed perimeter frame with sealed corners and compressible ceiling gasket
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Edge-lit or back-lit optical system300 x 1200 mm and 600 x 600 mm modulesEmergency driver packSelectable color temperature

Planning a Cleanroom LED Panel Light specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.