Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Portas de sala limpa, janelas e sistemas de bloqueio
Porta de acesso para equipamentos de sala limpa
An extra-wide framed access assembly that opens a large section of a modular cleanroom wall for moving machinery, carts and production equipment.
- Process Skid Transfer
- Single or Double Leaf
- Clear Polymer Infill
- Removable Mullion Option
Introdução do produto
The Cleanroom Equipment Access Door uses tall rigid acrylic or static-dissipative PVC panels inside a reinforced powder-coated frame. Single- and double-swing configurations create a substantially wider opening than a personnel door, allowing process equipment to enter without dismantling the surrounding hardwall enclosure. Surface-mounted hinges and secure latches remain accessible for maintenance outside critical operations.
Características-chave
Rigid transparent panels let operators verify the route before opening the leaves.
Reinforced frame carries tall leaves without relying on adjacent lightweight wall panels.
Independent active and inactive leaves allow partial opening for smaller transfers.
Replaceable panel construction supports future repair without replacing the full frame.
Preocupações do produto do cliente
Production equipment cannot pass through a standard personnel doorway.Wide single or double leaves create a full-height opening sized for machinery transfer.
Removing fixed cleanroom wall panels causes extended shutdown work.A permanent equipment access assembly opens without dismantling the enclosure.
Tall transparent leaves twist and lose alignment after repeated use.A reinforced perimeter frame and multiple hinges stabilize each full-height panel.
Opening the full width for every cart movement wastes conditioned air.The active leaf can operate independently while the secondary leaf remains secured.
Aplicações típicas
Process skid installationCleanroom machinery replacementLarge cart and rack transferModular production cell accessMaintenance shutdown access routes
Parâmetros técnicos
| Material principal | Rigid acrylic or static-dissipative PVC infill within reinforced metal framing |
|---|---|
| Painel de espessura | 6–12 mm rigid polymer infill |
| Largura efetiva | 1170–2420 mm clear opening, single or double leaf |
| Comprimento máximo | Up to 2380 mm clear opening height |
| Aço enfrentando espessura | Not applicable to clear panels; powder-coated steel frame typically 1.5–2.5 mm |
| Densidade Core | Aproximadamente 1180 kg / m3 para acrílico ou 1350 - 1450 kg / m3 para PVC rígido |
| Condutividade térmica | Aproximadamente 0,19 W / (m · K) para acrílico ou 0,14 - 0,17 W / (m · K) para PVC rígido |
| Superfície acabado | Clear or static-dissipative smooth panel with powder-coated steel or aluminum frame |
| Tipo conjunto | Reinforced single or double swing leaves with perimeter seals, active-leaf latch and inactive-leaf bolts |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Single or unequal double leavesClear acrylic or static-dissipative PVCRemovable center mullionLockable latch and hold-open hardware
Planning a Cleanroom Equipment Access Door specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
