English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Двери в чистых помещениях, окна и системы блокировки
Доступная дверь для оборудования чистой комнаты
An extra-wide framed access assembly that opens a large section of a modular cleanroom wall for moving machinery, carts and production equipment.
- Process Skid Transfer
- Single or Double Leaf
- Clear Polymer Infill
- Removable Mullion Option
Введение продукции
The Cleanroom Equipment Access Door uses tall rigid acrylic or static-dissipative PVC panels inside a reinforced powder-coated frame. Single- and double-swing configurations create a substantially wider opening than a personnel door, allowing process equipment to enter without dismantling the surrounding hardwall enclosure. Surface-mounted hinges and secure latches remain accessible for maintenance outside critical operations.
Основные характеристики
Rigid transparent panels let operators verify the route before opening the leaves.
Reinforced frame carries tall leaves without relying on adjacent lightweight wall panels.
Independent active and inactive leaves allow partial opening for smaller transfers.
Replaceable panel construction supports future repair without replacing the full frame.
Обеспокоенность клиентов продуктами
Production equipment cannot pass through a standard personnel doorway.Wide single or double leaves create a full-height opening sized for machinery transfer.
Removing fixed cleanroom wall panels causes extended shutdown work.A permanent equipment access assembly opens without dismantling the enclosure.
Tall transparent leaves twist and lose alignment after repeated use.A reinforced perimeter frame and multiple hinges stabilize each full-height panel.
Opening the full width for every cart movement wastes conditioned air.The active leaf can operate independently while the secondary leaf remains secured.
Типичные приложения
Process skid installationCleanroom machinery replacementLarge cart and rack transferModular production cell accessMaintenance shutdown access routes
Технические параметры
| Основной материал | Rigid acrylic or static-dissipative PVC infill within reinforced metal framing |
|---|---|
| Толщина панели | 6–12 mm rigid polymer infill |
| эффективная ширина | 1170–2420 mm clear opening, single or double leaf |
| Максимальная длина | Up to 2380 mm clear opening height |
| Толщина линий стали | Not applicable to clear panels; powder-coated steel frame typically 1.5–2.5 mm |
| Плотность ядра | Approximately 1180 kg/m³ for acrylic or 1350–1450 kg/m³ for rigid PVC |
| Теплопроводимость | Approximately 0.19 W/(m·K) for acrylic or 0.14–0.17 W/(m·K) for rigid PVC |
| Поверхностная отделка | Clear or static-dissipative smooth panel with powder-coated steel or aluminum frame |
| Объединенный тип | Reinforced single or double swing leaves with perimeter seals, active-leaf latch and inactive-leaf bolts |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Single or unequal double leavesClear acrylic or static-dissipative PVCRemovable center mullionLockable latch and hold-open hardware
Planning a Cleanroom Equipment Access Door specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
