English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أبواب الغرف النظيفة ونوافذ وأنظمة التشابك
غرفة نظيفة معدات الوصول الباب
An extra-wide framed access assembly that opens a large section of a modular cleanroom wall for moving machinery, carts and production equipment.
- Process Skid Transfer
- Single or Double Leaf
- Clear Polymer Infill
- Removable Mullion Option
مقدمة المنتج
The Cleanroom Equipment Access Door uses tall rigid acrylic or static-dissipative PVC panels inside a reinforced powder-coated frame. Single- and double-swing configurations create a substantially wider opening than a personnel door, allowing process equipment to enter without dismantling the surrounding hardwall enclosure. Surface-mounted hinges and secure latches remain accessible for maintenance outside critical operations.
الخصائص الرئيسية
Rigid transparent panels let operators verify the route before opening the leaves.
Reinforced frame carries tall leaves without relying on adjacent lightweight wall panels.
Independent active and inactive leaves allow partial opening for smaller transfers.
Replaceable panel construction supports future repair without replacing the full frame.
مخاوف المنتج للعملاء
Production equipment cannot pass through a standard personnel doorway.Wide single or double leaves create a full-height opening sized for machinery transfer.
Removing fixed cleanroom wall panels causes extended shutdown work.A permanent equipment access assembly opens without dismantling the enclosure.
Tall transparent leaves twist and lose alignment after repeated use.A reinforced perimeter frame and multiple hinges stabilize each full-height panel.
Opening the full width for every cart movement wastes conditioned air.The active leaf can operate independently while the secondary leaf remains secured.
تطبيقات نموذجية
Process skid installationCleanroom machinery replacementLarge cart and rack transferModular production cell accessMaintenance shutdown access routes
المعلمات الفنية
| المواد الأساسية | Rigid acrylic or static-dissipative PVC infill within reinforced metal framing |
|---|---|
| سمك اللوحة | 6–12 mm rigid polymer infill |
| العرض الفعال | 1170–2420 mm clear opening, single or double leaf |
| الحد الأقصى الطول | Up to 2380 mm clear opening height |
| الصلب يواجه سمك | Not applicable to clear panels; powder-coated steel frame typically 1.5–2.5 mm |
| الكثافة الأساسية | Approximately 1180 kg/m³ for acrylic or 1350–1450 kg/m³ for rigid PVC |
| الموصلية الحرارية | Approximately 0.19 W/(m·K) for acrylic or 0.14–0.17 W/(m·K) for rigid PVC |
| إنهاء السطح | Clear or static-dissipative smooth panel with powder-coated steel or aluminum frame |
| نوع المشترك | Reinforced single or double swing leaves with perimeter seals, active-leaf latch and inactive-leaf bolts |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Single or unequal double leavesClear acrylic or static-dissipative PVCRemovable center mullionLockable latch and hold-open hardware
Planning a Cleanroom Equipment Access Door specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
