Cleanroom equipment access door in a complete wide double-leaf three-quarter view

Pintu Cleanroom, Jendela dan Sistem Interlock

Pintu Akses Peralatan Cleanroom

An extra-wide framed access assembly that opens a large section of a modular cleanroom wall for moving machinery, carts and production equipment.

Process Skid Transfer
Daun tunggal atau ganda
Clear Polymer Infill
Removable Mullion Option

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The Cleanroom Equipment Access Door uses tall rigid acrylic or static-dissipative PVC panels inside a reinforced powder-coated frame. Single- and double-swing configurations create a substantially wider opening than a personnel door, allowing process equipment to enter without dismantling the surrounding hardwall enclosure. Surface-mounted hinges and secure latches remain accessible for maintenance outside critical operations.

Fitur utama:

Wide double-swing configuration clears a large equipment transfer path.

Rigid transparent panels let operators verify the route before opening the leaves.

Reinforced frame carries tall leaves without relying on adjacent lightweight wall panels.

Independent active and inactive leaves allow partial opening for smaller transfers.

Replaceable panel construction supports future repair without replacing the full frame.

Kekhawatiran produk pelanggan

Production equipment cannot pass through a standard personnel doorway.Wide single or double leaves create a full-height opening sized for machinery transfer.

Removing fixed cleanroom wall panels causes extended shutdown work.A permanent equipment access assembly opens without dismantling the enclosure.

Tall transparent leaves twist and lose alignment after repeated use.A reinforced perimeter frame and multiple hinges stabilize each full-height panel.

Opening the full width for every cart movement wastes conditioned air.The active leaf can operate independently while the secondary leaf remains secured.

Aplikasi yang Tipis

Process skid installationCleanroom machinery replacementLarge cart and rack transferModular production cell accessMaintenance shutdown access routes

Parameter teknis

Bahan inti	Rigid acrylic or static-dissipative PVC infill within reinforced metal framing
Ketebalan Panel (Panel Thickness)	6–12 mm rigid polymer infill
Efektif lebar	1170–2420 mm clear opening, single or double leaf
Panjang maksimum	Up to 2380 mm clear opening height
Baja menghadap ketebalan	Not applicable to clear panels; powder-coated steel frame typically 1.5–2.5 mm
Kepadatan inti (core density)	Approximately 1180 kg/m³ for acrylic or 1350–1450 kg/m³ for rigid PVC
Konduktivitas Termal (Thermal Conductivity)	Approximately 0.19 W/(m·K) for acrylic or 0.14–0.17 W/(m·K) for rigid PVC
Permukaan selesai	Clear or static-dissipative smooth panel with powder-coated steel or aluminum frame
Jenis Bersama	Reinforced single or double swing leaves with perimeter seals, active-leaf latch and inactive-leaf bolts
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Single or unequal double leavesClear acrylic or static-dissipative PVCRemovable center mullionLockable latch and hold-open hardware

Planning a Cleanroom Equipment Access Door specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami