Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Portes de salle blanche, fenêtres et systèmes de verrouillage
Porte d'accès à l'équipement de salle blanche
An extra-wide framed access assembly that opens a large section of a modular cleanroom wall for moving machinery, carts and production equipment.
- Process Skid Transfer
- Single ou double feuille
- Clear Polymer Infill
- Removable Mullion Option
Introduction de produit
The Cleanroom Equipment Access Door uses tall rigid acrylic or static-dissipative PVC panels inside a reinforced powder-coated frame. Single- and double-swing configurations create a substantially wider opening than a personnel door, allowing process equipment to enter without dismantling the surrounding hardwall enclosure. Surface-mounted hinges and secure latches remain accessible for maintenance outside critical operations.
Key Features
Rigid transparent panels let operators verify the route before opening the leaves.
Reinforced frame carries tall leaves without relying on adjacent lightweight wall panels.
Independent active and inactive leaves allow partial opening for smaller transfers.
Replaceable panel construction supports future repair without replacing the full frame.
Préoccupations du client produit
Production equipment cannot pass through a standard personnel doorway.Wide single or double leaves create a full-height opening sized for machinery transfer.
Removing fixed cleanroom wall panels causes extended shutdown work.A permanent equipment access assembly opens without dismantling the enclosure.
Tall transparent leaves twist and lose alignment after repeated use.A reinforced perimeter frame and multiple hinges stabilize each full-height panel.
Opening the full width for every cart movement wastes conditioned air.The active leaf can operate independently while the secondary leaf remains secured.
Les applications typiques
Process skid installationCleanroom machinery replacementLarge cart and rack transferModular production cell accessMaintenance shutdown access routes
Paramètres techniques
| Matériaux de base | Rigid acrylic or static-dissipative PVC infill within reinforced metal framing |
|---|---|
| Panneau épaisseur | 6–12 mm rigid polymer infill |
| Largeur effective | 1170–2420 mm clear opening, single or double leaf |
| Longueur maximale | Up to 2380 mm clear opening height |
| Acier face épaisseur | Not applicable to clear panels; powder-coated steel frame typically 1.5–2.5 mm |
| Densité Core | Environ 1180 kg / m3 pour l'acrylique ou 1350 - 1450 kg / m3 pour le PVC rigide |
| Conductivité thermique | Environ 0,19 W / (m · K) pour l'acrylique ou 0,14 - 0,17 W / (m · K) pour le PVC rigide |
| surface finie | Clear or static-dissipative smooth panel with powder-coated steel or aluminum frame |
| Type joint | Reinforced single or double swing leaves with perimeter seals, active-leaf latch and inactive-leaf bolts |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Single or unequal double leavesClear acrylic or static-dissipative PVCRemovable center mullionLockable latch and hold-open hardware
Planning a Cleanroom Equipment Access Door specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
