Cleanroom equipment access door in a complete wide double-leaf three-quarter view

Reinraumtüren, Fenster und Interlock-Systeme

Reinraum Ausrüstung Zugang Tür

An extra-wide framed access assembly that opens a large section of a modular cleanroom wall for moving machinery, carts and production equipment.

Process Skid Transfer
Single oder Double Leaf
Clear Polymer Infill
Removable Mullion Option

Bitte senden Sie eine Anfrage. Browse Produkte

Produkteinführung

The Cleanroom Equipment Access Door uses tall rigid acrylic or static-dissipative PVC panels inside a reinforced powder-coated frame. Single- and double-swing configurations create a substantially wider opening than a personnel door, allowing process equipment to enter without dismantling the surrounding hardwall enclosure. Surface-mounted hinges and secure latches remain accessible for maintenance outside critical operations.

Key Features

Wide double-swing configuration clears a large equipment transfer path.

Rigid transparent panels let operators verify the route before opening the leaves.

Reinforced frame carries tall leaves without relying on adjacent lightweight wall panels.

Independent active and inactive leaves allow partial opening for smaller transfers.

Replaceable panel construction supports future repair without replacing the full frame.

Kunden Produktbedenken

Production equipment cannot pass through a standard personnel doorway.Wide single or double leaves create a full-height opening sized for machinery transfer.

Removing fixed cleanroom wall panels causes extended shutdown work.A permanent equipment access assembly opens without dismantling the enclosure.

Tall transparent leaves twist and lose alignment after repeated use.A reinforced perimeter frame and multiple hinges stabilize each full-height panel.

Opening the full width for every cart movement wastes conditioned air.The active leaf can operate independently while the secondary leaf remains secured.

Typische Anwendungen

Process skid installationCleanroom machinery replacementLarge cart and rack transferModular production cell accessMaintenance shutdown access routes

Technische Parameter

Core Material	Rigid acrylic or static-dissipative PVC infill within reinforced metal framing
Panel Dicke	6–12 mm rigid polymer infill
Effektive Breite	1170–2420 mm clear opening, single or double leaf
Maximale Länge	Up to 2380 mm clear opening height
Stahl facing Dicke	Not applicable to clear panels; powder-coated steel frame typically 1.5–2.5 mm
Kerndichte	Ca. 1180 kg / m3 für Acryl oder 1350 - 1450 kg / m3 für starres PVC
Thermische Leitfähigkeit	Etwa 0,19 W / (m · K) für Acryl oder 0,14 - 0,17 W / (m · K) für starres PVC
Oberfläche Finish	Clear or static-dissipative smooth panel with powder-coated steel or aluminum frame
Gemeinsamer Typ	Reinforced single or double swing leaves with perimeter seals, active-leaf latch and inactive-leaf bolts
Customisierung	Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung.

Verfügbare Optionen

Single or unequal double leavesClear acrylic or static-dissipative PVCRemovable center mullionLockable latch and hold-open hardware

Planning a Cleanroom Equipment Access Door specification?

Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.

Sprechen Sie mit unserem Team