Cleanroom equipment access door in a complete wide double-leaf three-quarter view

クリーンルームのドア、窓およびインターロックシステム

クリーンルーム装置のアクセスドア

An extra-wide framed access assembly that opens a large section of a modular cleanroom wall for moving machinery, carts and production equipment.

Process Skid Transfer
シングルまたはダブルリーフ
Clear Polymer Infill
Removable Mullion Option

見積もりリクエスト製品案内

商品紹介

The Cleanroom Equipment Access Door uses tall rigid acrylic or static-dissipative PVC panels inside a reinforced powder-coated frame. Single- and double-swing configurations create a substantially wider opening than a personnel door, allowing process equipment to enter without dismantling the surrounding hardwall enclosure. Surface-mounted hinges and secure latches remain accessible for maintenance outside critical operations.

主要な特徴

Wide double-swing configuration clears a large equipment transfer path.

Rigid transparent panels let operators verify the route before opening the leaves.

Reinforced frame carries tall leaves without relying on adjacent lightweight wall panels.

Independent active and inactive leaves allow partial opening for smaller transfers.

Replaceable panel construction supports future repair without replacing the full frame.

お客様の製品に関する懸念事項

Production equipment cannot pass through a standard personnel doorway.Wide single or double leaves create a full-height opening sized for machinery transfer.

Removing fixed cleanroom wall panels causes extended shutdown work.A permanent equipment access assembly opens without dismantling the enclosure.

Tall transparent leaves twist and lose alignment after repeated use.A reinforced perimeter frame and multiple hinges stabilize each full-height panel.

Opening the full width for every cart movement wastes conditioned air.The active leaf can operate independently while the secondary leaf remains secured.

典型的な用途

Process skid installationCleanroom machinery replacementLarge cart and rack transferModular production cell accessMaintenance shutdown access routes

技術的なパラメータ

コア材料	Rigid acrylic or static-dissipative PVC infill within reinforced metal framing
パネルの厚さ	6–12 mm rigid polymer infill
有効幅	1170–2420 mm clear opening, single or double leaf
最大長さ	Up to 2380 mm clear opening height
鋼鉄の厚さを直面する	Not applicable to clear panels; powder-coated steel frame typically 1.5–2.5 mm
コア密度	アクリルの場合約 1180 kg / m3 、硬質 PVC の場合約 1350 — 1450 kg / m3
熱伝導率	アクリルの場合約 0.19 W / （m · K）、硬質 PVC の場合約 0.14 〜 0.17 W / （m · K）
表面仕上げ	Clear or static-dissipative smooth panel with powder-coated steel or aluminum frame
ジョイントタイプ	Reinforced single or double swing leaves with perimeter seals, active-leaf latch and inactive-leaf bolts
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Single or unequal double leavesClear acrylic or static-dissipative PVCRemovable center mullionLockable latch and hold-open hardware

Planning a Cleanroom Equipment Access Door specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する