Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Puertas de sala limpia, ventanas y sistemas de bloqueo
Puerta de acceso a equipos de sala limpia
An extra-wide framed access assembly that opens a large section of a modular cleanroom wall for moving machinery, carts and production equipment.
- Process Skid Transfer
- Single o Double Leaf
- Clear Polymer Infill
- Removable Mullion Option
Introducción del producto
The Cleanroom Equipment Access Door uses tall rigid acrylic or static-dissipative PVC panels inside a reinforced powder-coated frame. Single- and double-swing configurations create a substantially wider opening than a personnel door, allowing process equipment to enter without dismantling the surrounding hardwall enclosure. Surface-mounted hinges and secure latches remain accessible for maintenance outside critical operations.
Características clave
Rigid transparent panels let operators verify the route before opening the leaves.
Reinforced frame carries tall leaves without relying on adjacent lightweight wall panels.
Independent active and inactive leaves allow partial opening for smaller transfers.
Replaceable panel construction supports future repair without replacing the full frame.
Preocupaciones del producto del cliente
Production equipment cannot pass through a standard personnel doorway.Wide single or double leaves create a full-height opening sized for machinery transfer.
Removing fixed cleanroom wall panels causes extended shutdown work.A permanent equipment access assembly opens without dismantling the enclosure.
Tall transparent leaves twist and lose alignment after repeated use.A reinforced perimeter frame and multiple hinges stabilize each full-height panel.
Opening the full width for every cart movement wastes conditioned air.The active leaf can operate independently while the secondary leaf remains secured.
Aplicaciones típicas
Process skid installationCleanroom machinery replacementLarge cart and rack transferModular production cell accessMaintenance shutdown access routes
Parámetros técnicos
| Materiales Core | Rigid acrylic or static-dissipative PVC infill within reinforced metal framing |
|---|---|
| Panel de espesor | 6–12 mm rigid polymer infill |
| Ancho efectivo | 1170–2420 mm clear opening, single or double leaf |
| Longitud máxima | Up to 2380 mm clear opening height |
| Acero frente a espesor | Not applicable to clear panels; powder-coated steel frame typically 1.5–2.5 mm |
| Densidad Core | Aproximadamente 1180 kg / m3 para acrílico o 1350 - 1450 kg / m3 para PVC rígido |
| Conductividad térmica | Aproximadamente 0,19 W / (m · K) para acrílico o 0,14 - 0,17 W / (m · K) para PVC rígido |
| Superficie acabada | Clear or static-dissipative smooth panel with powder-coated steel or aluminum frame |
| Tipo conjunto | Reinforced single or double swing leaves with perimeter seals, active-leaf latch and inactive-leaf bolts |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Single or unequal double leavesClear acrylic or static-dissipative PVCRemovable center mullionLockable latch and hold-open hardware
Planning a Cleanroom Equipment Access Door specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
