Automatic two-hand sanitizer dispenser in stainless steel

Equipamento de descontaminação de pessoal e materiais

Dispensador automático de desinfetantes de duas mãos

An enclosed dispenser that treats both hands with a metered sanitizer spray after the user places them in separate hand ports.

Simultaneous two-hand positioning
Enclosed spray hand ports
Touchless presence sensing
Cycle-completion output

Solicite um orçamento. Browse produtos

Introdução do produto

The Automatic Two-Hand Sanitizer Dispenser uses two enclosed hand ports to position both hands before a metered sanitizer spray is released. Optical sensing can prevent dispensing until both ports are occupied, while the enclosed geometry directs excess liquid to a removable drip tray. A dry-contact output can be used by connected equipment after the programmed dispense cycle is complete.

Características-chave

Separate ports guide the user to position both hands for the programmed cycle.

Opposed nozzles can apply the selected sanitizer around the intended hand area.

Optical sensing avoids the need for a shared activation button.

An enclosed port geometry contains overspray above a removable drip tray.

A completion output can be made available to compatible external control equipment.

Preocupações do produto do cliente

A wall-mounted pump dispenser cannot confirm two-hand positioning or contain excess liquid at a busy entry route.

A single hand pump dose may be applied inconsistently.The two-port arrangement uses metered nozzles after both hands are positioned.

Users activate a dispenser with one hand and continue through the entrance.Sensors can require both hand ports to be occupied before the cycle begins.

Spray from an open dispenser reaches the floor below it.Enclosed hand ports direct excess liquid to a removable drip tray.

Connected entry equipment needs a signal only after dispensing is complete.The controller can provide a dry-contact completion output at the end of the programmed cycle.

Aplicações típicas

Food production hygiene barriersCleanroom personnel entriesPharmaceutical support areasMedical manufacturing changing roomsControlled packaging access

Parâmetros técnicos

Cabinet format, hand-port geometry and solution-reservoir arrangement can be selected for the entrance layout and chosen sanitizer.

Material principal	Chemical-resistant polyethylene fluid lines in a SUS304 enclosure
Painel de espessura	1.2–1.5 mm stainless steel enclosure panels
Largura efetiva	350–600 mm operator access width
Comprimento máximo	500–900 mm overall dispenser height
Aço enfrentando espessura	1.2–1.5 mm SUS304
Densidade Core	930–960 kg/m³ for polyethylene fluid components
Condutividade térmica	0.40–0.50 W/(m·K) for polyethylene fluid components
Superfície acabado	Brushed SUS304 with chemical-resistant hand ports and drip tray
Tipo conjunto	Sealed dispenser cabinet with removable reservoir and drain-tray connections
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

Pedestal or wall-mounted bodyReservoir level alarmChoice of hand-port orientationExternal completion relay

Planning a Automatic Two-Hand Sanitizer Dispenser specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe