Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de descontaminación de personal y material
Dispensador automático de desinfectantes de dos manos
An enclosed dispenser that treats both hands with a metered sanitizer spray after the user places them in separate hand ports.
- Simultaneous two-hand positioning
- Enclosed spray hand ports
- Touchless presence sensing
- Cycle-completion output
Introducción del producto
The Automatic Two-Hand Sanitizer Dispenser uses two enclosed hand ports to position both hands before a metered sanitizer spray is released. Optical sensing can prevent dispensing until both ports are occupied, while the enclosed geometry directs excess liquid to a removable drip tray. A dry-contact output can be used by connected equipment after the programmed dispense cycle is complete.
Características clave
Opposed nozzles can apply the selected sanitizer around the intended hand area.
Optical sensing avoids the need for a shared activation button.
An enclosed port geometry contains overspray above a removable drip tray.
A completion output can be made available to compatible external control equipment.
Preocupaciones del producto del cliente
A wall-mounted pump dispenser cannot confirm two-hand positioning or contain excess liquid at a busy entry route.
A single hand pump dose may be applied inconsistently.The two-port arrangement uses metered nozzles after both hands are positioned.
Users activate a dispenser with one hand and continue through the entrance.Sensors can require both hand ports to be occupied before the cycle begins.
Spray from an open dispenser reaches the floor below it.Enclosed hand ports direct excess liquid to a removable drip tray.
Connected entry equipment needs a signal only after dispensing is complete.The controller can provide a dry-contact completion output at the end of the programmed cycle.
Aplicaciones típicas
Food production hygiene barriersCleanroom personnel entriesPharmaceutical support areasMedical manufacturing changing roomsControlled packaging access
Parámetros técnicos
Cabinet format, hand-port geometry and solution-reservoir arrangement can be selected for the entrance layout and chosen sanitizer.
| Materiales Core | Chemical-resistant polyethylene fluid lines in a SUS304 enclosure |
|---|---|
| Panel de espesor | 1.2–1.5 mm stainless steel enclosure panels |
| Ancho efectivo | 350–600 mm operator access width |
| Longitud máxima | 500–900 mm overall dispenser height |
| Acero frente a espesor | 1.2–1.5 mm SUS304 |
| Densidad Core | 930–960 kg/m³ for polyethylene fluid components |
| Conductividad térmica | 0.40–0.50 W/(m·K) for polyethylene fluid components |
| Superficie acabada | Brushed SUS304 with chemical-resistant hand ports and drip tray |
| Tipo conjunto | Sealed dispenser cabinet with removable reservoir and drain-tray connections |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Pedestal or wall-mounted bodyReservoir level alarmChoice of hand-port orientationExternal completion relay
Planning a Automatic Two-Hand Sanitizer Dispenser specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
