English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات إزالة التلوث للموظفين والمواد
Aالتلقائي موزع معقّم يديين
An enclosed dispenser that treats both hands with a metered sanitizer spray after the user places them in separate hand ports.
- Simultaneous two-hand positioning
- Enclosed spray hand ports
- Touchless presence sensing
- Cycle-completion output
مقدمة المنتج
The Automatic Two-Hand Sanitizer Dispenser uses two enclosed hand ports to position both hands before a metered sanitizer spray is released. Optical sensing can prevent dispensing until both ports are occupied, while the enclosed geometry directs excess liquid to a removable drip tray. A dry-contact output can be used by connected equipment after the programmed dispense cycle is complete.
الخصائص الرئيسية
Opposed nozzles can apply the selected sanitizer around the intended hand area.
Optical sensing avoids the need for a shared activation button.
An enclosed port geometry contains overspray above a removable drip tray.
A completion output can be made available to compatible external control equipment.
مخاوف المنتج للعملاء
A wall-mounted pump dispenser cannot confirm two-hand positioning or contain excess liquid at a busy entry route.
A single hand pump dose may be applied inconsistently.The two-port arrangement uses metered nozzles after both hands are positioned.
Users activate a dispenser with one hand and continue through the entrance.Sensors can require both hand ports to be occupied before the cycle begins.
Spray from an open dispenser reaches the floor below it.Enclosed hand ports direct excess liquid to a removable drip tray.
Connected entry equipment needs a signal only after dispensing is complete.The controller can provide a dry-contact completion output at the end of the programmed cycle.
تطبيقات نموذجية
Food production hygiene barriersCleanroom personnel entriesPharmaceutical support areasMedical manufacturing changing roomsControlled packaging access
المعلمات الفنية
Cabinet format, hand-port geometry and solution-reservoir arrangement can be selected for the entrance layout and chosen sanitizer.
| المواد الأساسية | Chemical-resistant polyethylene fluid lines in a SUS304 enclosure |
|---|---|
| سمك اللوحة | 1.2–1.5 mm stainless steel enclosure panels |
| العرض الفعال | 350–600 mm operator access width |
| الحد الأقصى الطول | 500–900 mm overall dispenser height |
| الصلب يواجه سمك | 1.2–1.5 mm SUS304 |
| الكثافة الأساسية | 930–960 kg/m³ for polyethylene fluid components |
| الموصلية الحرارية | 0.40–0.50 W/(m·K) for polyethylene fluid components |
| إنهاء السطح | Brushed SUS304 with chemical-resistant hand ports and drip tray |
| نوع المشترك | Sealed dispenser cabinet with removable reservoir and drain-tray connections |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Pedestal or wall-mounted bodyReservoir level alarmChoice of hand-port orientationExternal completion relay
Planning a Automatic Two-Hand Sanitizer Dispenser specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
