Automatic two-hand sanitizer dispenser in stainless steel

Персонал и оборудование для дезактивации материалов

Автоматический двухручный дезинфицирующий диспенсер

An enclosed dispenser that treats both hands with a metered sanitizer spray after the user places them in separate hand ports.

Simultaneous two-hand positioning
Enclosed spray hand ports
Touchless presence sensing
Cycle-completion output

Запрос котировки Просмотреть продукты

Введение продукции

The Automatic Two-Hand Sanitizer Dispenser uses two enclosed hand ports to position both hands before a metered sanitizer spray is released. Optical sensing can prevent dispensing until both ports are occupied, while the enclosed geometry directs excess liquid to a removable drip tray. A dry-contact output can be used by connected equipment after the programmed dispense cycle is complete.

Основные характеристики

Separate ports guide the user to position both hands for the programmed cycle.

Opposed nozzles can apply the selected sanitizer around the intended hand area.

Optical sensing avoids the need for a shared activation button.

An enclosed port geometry contains overspray above a removable drip tray.

A completion output can be made available to compatible external control equipment.

Обеспокоенность клиентов продуктами

A wall-mounted pump dispenser cannot confirm two-hand positioning or contain excess liquid at a busy entry route.

A single hand pump dose may be applied inconsistently.The two-port arrangement uses metered nozzles after both hands are positioned.

Users activate a dispenser with one hand and continue through the entrance.Sensors can require both hand ports to be occupied before the cycle begins.

Spray from an open dispenser reaches the floor below it.Enclosed hand ports direct excess liquid to a removable drip tray.

Connected entry equipment needs a signal only after dispensing is complete.The controller can provide a dry-contact completion output at the end of the programmed cycle.

Типичные приложения

Food production hygiene barriersCleanroom personnel entriesPharmaceutical support areasMedical manufacturing changing roomsControlled packaging access

Технические параметры

Cabinet format, hand-port geometry and solution-reservoir arrangement can be selected for the entrance layout and chosen sanitizer.

Основной материал	Chemical-resistant polyethylene fluid lines in a SUS304 enclosure
Толщина панели	1.2–1.5 mm stainless steel enclosure panels
эффективная ширина	350–600 mm operator access width
Максимальная длина	500–900 mm overall dispenser height
Толщина линий стали	1.2–1.5 mm SUS304
Плотность ядра	930–960 kg/m³ for polyethylene fluid components
Теплопроводимость	0.40–0.50 W/(m·K) for polyethylene fluid components
Поверхностная отделка	Brushed SUS304 with chemical-resistant hand ports and drip tray
Объединенный тип	Sealed dispenser cabinet with removable reservoir and drain-tray connections
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Pedestal or wall-mounted bodyReservoir level alarmChoice of hand-port orientationExternal completion relay

Planning a Automatic Two-Hand Sanitizer Dispenser specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой