İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Personel ve Malzeme Dekontaminasyon Ekipmanları
Otomatik iki el sanitizer dağıtıcı
An enclosed dispenser that treats both hands with a metered sanitizer spray after the user places them in separate hand ports.
- Simultaneous two-hand positioning
- Enclosed spray hand ports
- Touchless presence sensing
- Cycle-completion output
Ürün tanıtımı
The Automatic Two-Hand Sanitizer Dispenser uses two enclosed hand ports to position both hands before a metered sanitizer spray is released. Optical sensing can prevent dispensing until both ports are occupied, while the enclosed geometry directs excess liquid to a removable drip tray. A dry-contact output can be used by connected equipment after the programmed dispense cycle is complete.
Ana Özellikler
Opposed nozzles can apply the selected sanitizer around the intended hand area.
Optical sensing avoids the need for a shared activation button.
An enclosed port geometry contains overspray above a removable drip tray.
A completion output can be made available to compatible external control equipment.
Müşteri Ürün Sorunları
A wall-mounted pump dispenser cannot confirm two-hand positioning or contain excess liquid at a busy entry route.
A single hand pump dose may be applied inconsistently.The two-port arrangement uses metered nozzles after both hands are positioned.
Users activate a dispenser with one hand and continue through the entrance.Sensors can require both hand ports to be occupied before the cycle begins.
Spray from an open dispenser reaches the floor below it.Enclosed hand ports direct excess liquid to a removable drip tray.
Connected entry equipment needs a signal only after dispensing is complete.The controller can provide a dry-contact completion output at the end of the programmed cycle.
Tipik uygulamalar
Food production hygiene barriersCleanroom personnel entriesPharmaceutical support areasMedical manufacturing changing roomsControlled packaging access
Teknik parametreler
Cabinet format, hand-port geometry and solution-reservoir arrangement can be selected for the entrance layout and chosen sanitizer.
| Temel malzemeler | Chemical-resistant polyethylene fluid lines in a SUS304 enclosure |
|---|---|
| Panel kalınlığı | 1.2–1.5 mm stainless steel enclosure panels |
| Effective Width (Etkili Genişlik) | 350–600 mm operator access width |
| Maksimum uzunluk | 500–900 mm overall dispenser height |
| Çelik yüz yüze kalınlığı | 1.2–1.5 mm SUS304 |
| Core Density (Çekirdek Yoğunluğu) | 930–960 kg/m³ for polyethylene fluid components |
| Termal İletkenlik | 0.40–0.50 W/(m·K) for polyethylene fluid components |
| Yüzey bitirme | Brushed SUS304 with chemical-resistant hand ports and drip tray |
| Ortak tip | Sealed dispenser cabinet with removable reservoir and drain-tray connections |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Pedestal or wall-mounted bodyReservoir level alarmChoice of hand-port orientationExternal completion relay
Planning a Automatic Two-Hand Sanitizer Dispenser specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
